qmk_firmware/keyboards/crkbd/keymaps/drashna/keymap.c
Drashna Jaelre ecd21b44a8 Update to drashna userspace and keymaps (#4459)
* Fix reversed bool check in layer_state_set

* Add Quefrency 65 for a friend

* Add Ergodox EZ Glow keymap

* Add RGB Matrix Code

* Further changes to rgb matrix ErgoDox EZ

* Update bjohnson keymaps

* Fix CRKBD display

* Overhaul to corne keyboard

* Narrow scope for keylogger

* Minor layout tweaks to Corne Keyboard

* additional CRKBD tweaks

* Minor tweaks to CRKBD

* Add all characters for keylogger

* Ergodox EZ Glow overhaul

* Fix Ergodox EZ Glow layer colors

* Increase Tapping Term for Corne Keyboard

* Fix unicode-ish

* Revert some changes

* Add layer specific lighting effects

* Some minor tweaks to ergodox glow config

* revert changes to ergodox files

* Update Glow readme

* Add more tapping term defines

* Fix changes

* Fix ergodox keymap

* Hopefully fix sleeping

* Disable layer indications if rgb matrix is disabled

* Add support for sleeping and rgb layer change toggle to ergodox ez glow

* Make RGB Layer Indication Great Again

* Make Unicode Great Again

* Remove placeholder define

Co-Authored-By: drashna <drashna@live.com>

* Remove placeholder define

Co-Authored-By: drashna <drashna@live.com>

* Remove old EEPROM Reset keycode
2018-11-26 16:45:24 -08:00

265 lines
9.6 KiB
C

#include QMK_KEYBOARD_H
#include "drashna.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
extern uint8_t is_master;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
enum crkbd_keycodes {
RGBRST = NEW_SAFE_RANGE
};
#define LAYOUT_crkbd_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
) \
LAYOUT_wrapper( \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RGUI_T(KC_QUOT), \
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, CTL_T(K2A), OS_RSFT, \
LT(_LOWER,KC_GRV), KC_SPC, KC_BSPC, KC_DEL, KC_ENT, RAISE \
)
#define LAYOUT_crkbd_base_wrapper(...) LAYOUT_crkbd_base(__VA_ARGS__)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_crkbd_base_wrapper(
_________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
_________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
_________________QWERTY_L3_________________, _________________QWERTY_R3_________________
),
[_COLEMAK] = LAYOUT_crkbd_base_wrapper(
_________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
_________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
_________________COLEMAK_L3________________, _________________COLEMAK_R3________________
),
[_DVORAK] = LAYOUT_crkbd_base_wrapper(
_________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
_________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
_________________DVORAK_L3_________________, _________________DVORAK_R3_________________
),
[_WORKMAN] = LAYOUT_crkbd_base_wrapper(
_________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
_________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
_________________WORKMAN_L3________________, _________________WORKMAN_R3________________
),
[_MODS] = LAYOUT_wrapper(
_______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
_______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
KC_LSFT, ___________________BLANK___________________, ___________________BLANK___________________, KC_RSFT,
_______, _______, _______, _______, _______, _______
),
[_LOWER] = LAYOUT_wrapper(
KC_F11, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11,
KC_F12, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
_______, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______,
_______, _______, _______, _______, _______, _______
),
[_RAISE] = LAYOUT_wrapper( \
_______, _________________RAISE_L1__________________, _________________RAISE_R1__________________, _______,
_______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS,
_______, _________________RAISE_L3__________________, _________________RAISE_R3__________________, _______,
_______, _______, _______, _______, _______, _______
),
[_ADJUST] = LAYOUT_wrapper( \
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
_______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
_______, _______, _______, KC_NUKE, TG_MODS, _______
)
};
void matrix_init_keymap(void) {
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
DDRD &= ~(1<<5);
PORTD &= ~(1<<5);
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_logo(void);
char layer_state_str[24];
char modifier_state_str[24];
char host_led_state_str[24];
char keylog_str[24] = {};
char keylogs_str[21] = {};
int keylogs_str_idx = 0;
// const char *read_mode_icon(bool swap);
// void set_timelog(void);
// const char *read_timelog(void);
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
'#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
void set_keylog(uint16_t keycode, keyrecord_t *record) {
char name = ' ';
if (keycode < 60) {
name = code_to_name[keycode];
}
// update keylog
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
record->event.key.row, record->event.key.col,
keycode, name);
// update keylogs
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
keylogs_str_idx = 0;
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
keylogs_str[i] = ' ';
}
}
keylogs_str[keylogs_str_idx] = name;
keylogs_str_idx++;
}
const char *read_keylog(void) {
return keylog_str;
}
const char *read_keylogs(void) {
return keylogs_str;
}
const char* read_modifier_state(void) {
uint8_t modifiers = get_mods();
uint8_t one_shot = get_oneshot_mods();
snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s",
(modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL" : " ",
(modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI" : " ",
(modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT" : " ",
(modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : " "
);
return modifier_state_str;
}
const char *read_host_led_state(void) {
uint8_t leds = host_keyboard_leds();
snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
(leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
(leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
(leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "
);
return host_led_state_str;
}
const char* read_layer_state(void) {
switch (biton32(layer_state)) {
case _RAISE:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise ");
break;
case _LOWER:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower ");
break;
case _ADJUST:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust ");
break;
default:
switch (biton32(default_layer_state)) {
case _QWERTY:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty ");
break;
case _COLEMAK:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
break;
case _DVORAK:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak ");
break;
case _WORKMAN:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman");
break;
}
break;
}
return layer_state_str;
}
void matrix_scan_keymap(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
//If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_modifier_state());
// matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
// matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
matrix_write(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case KC_A ... KC_SLASH:
case KC_F1 ... KC_F12:
case KC_INSERT ... KC_UP:
case KC_KP_SLASH ... KC_KP_DOT:
case KC_F13 ... KC_F24:
if (record->event.pressed) { set_keylog(keycode, record); }
break;
// set_timelog();
}
return true;
}
#endif