qmk_firmware/keyboards/unison/v04/config.h
Takeshi Nishio 9f1608a6a2
Add unison v04 keyboard (#11982)
* Update: JonesのMIDIキーマップをベースに初期作成。AudioとMIDIの同時使用はファームウェアサイズ的に厳しい。

* Update: Unison用のIDへ変更

* Update: Audioはデフォとせず、OLEDをデフォとした。

* Update: v03基板から実際に動くものとなったため、v01からv03に変更。基本的な設定を完了。

* Update: 基本的なキーマップを作成

* Update: キーマップ、ロータリーエンコーダの感度を調整。

* TEST: BOOTMAGIC = lite でどうなるのかテスト

* Update: Jones ---> Unison

* TEST: BOOTMAGIC = lite で、TABキーでBootloaerに入る設定

* Update: インデント

* Update: QMKの一般的な表記に合わせ、 k(col)(row) から k(row)(col) へ変更。

* Update: 自前のカスタムマトリクスを使用せず、COL2ROW方式で総当たりマトリクスを動作させるテストを開始。

特に問題なく動作している。

* TEST: BOOTMAGICテスト用コード追加

* Update: 主に中央部分のキーマップ変更

* TEST: COL2ROWで、COLのピンの順番を変えてキーを読むテスト

* Update: QMKの仕様上、MacではKC_PSCRがFキーとして判定されるため、スクリーンショット用マクロを用意した。

* TEST: COL2ROWで、ROWとCOLのピン定義をずらした状態で、BOOTMAGIC = lite の(0,0)キーに引っかからない。

* Update: ロータリーエンコーダにマウスホイールを割り当て

* Update: 自明のコメントを削除

* Update: NKRO指定時は、NKRO動作を強制。

* Update: MIDIなしのとき、AUDIOのフル機能がファームウェアサイズ内に収まることをチェック。

* Update: Bootmagicテスト完了のため、無効化。

* TEST: LED動作チェック。

* Update: キーマップを、LOWER, RAISEを中心に大幅変更。

数字を左手レイヤーキーではなく、右手レイヤーキーにしたことで、CMD+Qによる誤爆アプリ終了を避ける狙いもある。

* Update: 未使用のNumレイヤとTapDanceを削除。

* Update: MIDI関連の設定を多数追加。

* New: Add Sequencer keymap

* enumの開始を明記

* TAP_DANCEを無効化

* シーケンサーで、トラック単位の有効・無効の切り替えを追加。※動作せず

* デバッグ用設定をテスト

* Change custom keycode name for classification.

* Add LED update on sequencer step.

* change LED adjusting value.

* TEST: SQ_T related things.

* DEBUG

* Increase track 6 ---> 8. Add track indicator.

* Add sequencer step viewer.

* Move Bootmagic lite position to keyboard's config.

* Revert matrix as phisically connected.

* Change default RGB lighting animation.

* Remove MIDI options from keyboard's config.

* change version

* Remove unused.

* Delete unused. Round-Robin matrix woks with COL2ROW.

* Delete unused. Round-Robin matrix woks with COL2ROW.

* Formatting.

* Formatting.

* Remove unused.

* No enum.

* LED setting for Sequencer layer.

* Add TODO flag

* Remove unused.

* change LCTL

* Update Rotary Encoder setting.

* revert to default

* Add TODO flag.

* Update to latest information.

* Update to latest information.

* Add v04

* Move keymaps directory to just under keyboard directory.

* Add music layout.

* Update to Unison layout.

* Add default keymap.

* Update readme description.

* Commenting.

* Exclude non-PR files.

* Change keymap name more general.

* Remove unused

* Commenting.

* Remove unused.

* Commenting.

* Change Macro name for consistency.

* Add tempo definition.

* Change transparent to noop for better musical play.

* Add Rotary Encoder push functions for Sequencer.

* FIX printscreen to work _WIN layer.

* Fix style name.

* Change keymap style from PC to Music.

* Adjust LED number and index to v04 PCB.

* Commenting.

* Add #ifdef block to LED config related.

* Change Sequencer display function from Rotary Encoder right-3 to right-4.

* Change default animations.

* Set LED effect range. Add LED reset on layer change.

* Remove unused.

* Commenting.

* Commenting.

* Use function to change Sequencer track indicator.

* Use function to change Sequencer track indicator.

* Remove unused

* Add PC-style keymap.

* Adjust keymap.

* Add micro volume control for Mac.

* Adjust keymap.

* Adjust cursor block.

* Adjust grave and tild in layer.

* Change magic-key position to Left-Bottom where both Music-style and Terminal-style have a key.

* Change LED settings for front-side 9 LEDs.

* Change keymap name.

* Update supported functions.

* Adjust indicator dimmer.

* Remove unused.

* Add underglow support.

* Add rotary encoder keymap at Adjust layer for test hardware function.

* Disable rotary encoders.

* Change description.

* Add support for underglow.

Disable knight animation to prevent unnatural feeling when underglow not installed.

* Commenting.

* Formatting.

* Turn on default layer indicator.

* remove duplication

* Change VID for via.

* Initial commit for VIA.

* Add layout option.

* restore AUDIO enabled.

* Removed a JSON file for VIA app, not for QMK.

* Remove non-related files for PR.

* Add keymap for music layout.

* Add photo links.

* Commenting.

* Apply PR checklist.

* Change unused function to "no".

* Add keymap image and change keymap as image shows.

* Change bootloader entering key to widely known "Left-Top".

* Turn off ENCODER by default.

* Add VIA keymap.

* Change VID unique.

https://github.com/qmk/qmk_firmware/pull/11982#discussion_r582276979

* Add config option to prepare future release, #11820.

https://github.com/qmk/qmk_firmware/pull/11820

* Remove old defines for Audio.

Co-authored-by: Takeshi Nishio <kkeennnn@gmail.com>
2021-03-25 23:38:31 +11:00

126 lines
3.9 KiB
C

/*
Copyright 2021 Takeshi Nishio
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xB9DD
#define PRODUCT_ID 0x176A
#define DEVICE_VER 0x0040
#define MANUFACTURER jpskenn
#define PRODUCT Unison
/* key matrix size */
/* NOTE: With Round-Robin matrix, set same size for both. */
#define MATRIX_ROWS 10
#define MATRIX_COLS 10
/* key matrix pins */
/* NOTE: With Round-Robin matrix, set same pins for both. */
#define MATRIX_ROW_PINS { B3, E6, F1, F5, F7, B2, F0, F4, F6, C7 }
#define MATRIX_COL_PINS { B3, E6, F1, F5, F7, B2, F0, F4, F6, C7 }
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW
/* Rotary Encoder */
#ifdef ENCODER_ENABLE
#define ENCODERS_PAD_A { B0, D2, D5, D6, B4 }
#define ENCODERS_PAD_B { B1, D3, D4, D7, B5 }
#define ENCODER_RESOLUTION 4 //the default & suggested is 4
#endif
/* Audio */
#ifdef AUDIO_ENABLE
#define AUDIO_PIN C6
#define AUDIO_PIN_ALT B6
#define AUDIO_CLICKY
#define MUSIC_MAP
#endif
/* RGB Lighting */
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
#define RGBLED_NUM 7 // Layer Indicator(2) + Rotary Encoder(5)
#define RGBLIGHT_LED_MAP {1, 2, 0, 3, 4, 5, 6} // align LEDs from Left to Right
#define RGBLIGHT_HUE_STEP 4
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== Lighting Layers ==*/
#define RGBLIGHT_LAYERS
// #define RGBLIGHT_MAX_LAYERS 2
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF // Overriding RGB Lighting on/off status
/*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
// #define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/*
* BOOTMAGIC Lite
* Hold Left-Top key to enter bootloader.
*
* NOTE:
* With Round-Robin matrix, diagonal position is always High.
* So, the default (0,0) is always judged as hold and keyboard enters bootloader.
* To prevent this, set specific position for it.
*/
#define BOOTMAGIC_LITE_ROW 5
#define BOOTMAGIC_LITE_COLUMN 0
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION