qmk_firmware/keyboards/cannonkeys/satisfaction75/config.h
Sergey Vlasov 2d3bd7cfcf
Fix OLED timeout on satisfaction75 after migration from QWIIC (#14780)
The custom OLED_OFF mode implemented on satisfaction75 is incompatible
with the OLED_TIMEOUT feature (the OLED_TIMEOUT code assumes that any
key or encoder action should turn the OLED display on, and does not
provide any way to disable that behavior).  To keep the OLED_OFF mode
functioning as before while still having a working OLED idle timeout, a
custom implementation of the OLED idle timeout code is added.
2021-10-10 17:01:29 +01:00

112 lines
3.1 KiB
C

/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Ensure we jump to bootloader if the RESET keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
/* LSE clock */
#define STM32_LSECLK 32768
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCA04
#define PRODUCT_ID 0x57F5
#define DEVICE_VER 0x0001
#define MANUFACTURER CannonKeys
#define PRODUCT Satisfaction75
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 16
#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 }
#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 }
#define DIODE_DIRECTION COL2ROW
#define ENCODERS_PAD_A { B9 }
#define ENCODERS_PAD_B { B8 }
#define ENCODER_RESOLUTION 2
//LEDS A6, RGB B15
#define BACKLIGHT_LEVELS 24
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
// I2C config
#define I2C_DRIVER I2CD1
#define I2C1_SCL_PIN B6
#define I2C1_SDA_PIN B7
#define I2C1_SCL_PAL_MODE 1
#define I2C1_SDA_PAL_MODE 1
#define I2C1_TIMINGR_PRESC 0x00U
#define I2C1_TIMINGR_SCLDEL 0x03U
#define I2C1_TIMINGR_SDADEL 0x01U
#define I2C1_TIMINGR_SCLH 0x03U
#define I2C1_TIMINGR_SCLL 0x09U
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
// configure oled driver for the 128x32 oled
#define OLED_UPDATE_INTERVAL 66 // ~15fps
// OLED_TIMEOUT is incompatible with the OLED_OFF mode
#define OLED_TIMEOUT 0
// OLED timeout reimplemented in the keyboard-specific code
#define CUSTOM_OLED_TIMEOUT 60000
// Custom config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
// Custom config Usage:
// 1 for enabled encoder modes (1 byte)
// 1 for custom backlighting controls (1 byte)
// 1 for OLED default mode (1 byte)
// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 21
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION