qmk_firmware/keyboards/durgod/dgk6x
James Young 84ea77ead6
Remove BOOTMAGIC_ENABLE = lite option (#15002)
* remove BOOTMAGIC_ENABLE=lite setting

* change keyboard BOOTMAGIC_ENABLE rules

Edits keyboard-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`.

* change keyboard BOOTMAGIC_ENABLE inline comments

Edits keyboard-level BOOTMAGIC_ENABLE inline comments to "Enable Bootmagic Lite".

* change keymap BOOTMAGIC_ENABLE rules

Edits keymap-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`.

* change keymap BOOTMAGIC_ENABLE inline comments

Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite".

* change layout/user BOOTMAGIC_ENABLE rules/comments

Edits instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`.

Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite".

* update non-rules.mk BOOTMAGIC_ENABLE references in keyboards/

* remove docs references to Full Bootmagic

* convert data-driven Bootmagic Lite instances

* remove Bootmagic Lite bodge from data-driven generation

* Merge remote-tracking branch 'upstream/develop' into rm/bootmagic-full_q4a

* update docs/ja/config_options.md per mtei

* update docs/faq_misc.md per mtei

Remove remaining Full Bootmagic reference.
2021-11-05 08:18:09 +11:00
..
galaxy Durgod DGK6X Galaxy: correct Configurator layout (#14714) 2021-10-05 16:30:09 -07:00
hades Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
venus Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
config.h Clean up remaining RGB_DISABLE_WHEN_USB_SUSPENDED defines (#13689) 2021-07-24 20:17:04 +01:00
dgk6x.c [Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893) 2021-07-20 09:44:22 -07:00
dgk6x.h [Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893) 2021-07-20 09:44:22 -07:00
halconf.h [Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893) 2021-07-20 09:44:22 -07:00
mcuconf.h [Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893) 2021-07-20 09:44:22 -07:00
readme.md [Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893) 2021-07-20 09:44:22 -07:00
rules.mk Remove BOOTMAGIC_ENABLE = lite option (#15002) 2021-11-05 08:18:09 +11:00

DGK6X = Venus, Hades, Galaxy, etc.

This DGK6X code is shared between the ANSI variants of Venus, Hades and Galaxy keyboards.

  • Keyboard Maintainer: J-Sully and dkjer
  • Hardware Supported: Durgod Venus, Hades or Galaxy board with STM32F070RBT6
  • Hardware Availability: Venus, Hades and Galaxy

Instructions

Build

Instructions for building the Venus, Hades and Galaxy firmware can be found here:

Initial Flash

For first Flashing from initial Stock's Firmware

  1. Back up original Firmware Image:
  • Unplug
  • Short Boot0 to Vdd (See below)
  • Plug In USB
  • Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
    • Using dfu-util:

      dfu-util --list
      dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
      
  1. Flash the QMK Firmware Image.
  • Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
  • Here are a few options for performing the initial Flash:
    • Using QMK Toolbox

    • Using dfu-util:

      dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
      

You can short Boot0 to Vdd by shorting R19 to C30 on the sides closest to the processor, as shown:

  • Hades & Venus: Shorting Boot0 to Vdd on Hades or Venus

  • Galaxy 75 Shorting Boot0 to Vdd on Galaxy 75

Subsequent Flashing

For repeating Flashing you can use BootMagic:

  • BootMagic Lite has been enabled with Assigned "Esc" key
  • Unplug USB Cable
  • Holding Esc Button
  • Plug in USB Cable, Keyboard should be in ST-Bootloader state