qmk_firmware/keyboards/kudox_full
2023-02-17 16:40:49 +11:00
..
keymaps Remove legacy international keycodes (#18588) 2022-10-09 14:51:09 +11:00
rev1 Move SOFT_SERIAL_PIN to data driven (#19863) 2023-02-17 16:40:49 +11:00
config.h Remove usages of config_common.h from config.h files. (#19714) 2023-01-31 06:03:30 +11:00
kudox_full.c [Keyboard] Add Kudox Full (#15256) 2022-01-08 13:23:34 -08:00
kudox_full.h [Keyboard] Add Kudox Full (#15256) 2022-01-08 13:23:34 -08:00
post_config.h [Keyboard] Add Kudox Full (#15256) 2022-01-08 13:23:34 -08:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

The Kudox Full keyboard

Kudox logo

Kudox Full image2 Kudox Full image1
front angle

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Building Firmware

Make example for this keyboard (after setting up your build environment):

make kudox_full/rev1:default

Flashing example for this keyboard:

make kudox_full/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.