qmk_firmware/keyboards/handwired/oem_iso_fullsize
2023-03-11 00:32:05 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
info.json Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
oem_iso_fullsize.c [Keyboard] Added two handwired keyboards (#11696) 2021-02-16 10:10:49 -08:00
oem_iso_fullsize.h [Keyboard] Added two handwired keyboards (#11696) 2021-02-16 10:10:49 -08:00
readme.md [Keyboard] Added two handwired keyboards (#11696) 2021-02-16 10:10:49 -08:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

oem_iso_fullsize

top view

I handwired a Gamdias 7 Colors that had a dead PCB and manage to revive it with a teensy

  • Keyboard Maintainer: Andres Teare

  • Hardware Supported: Teensy++ 2.0

  • Hardware Availability: got the teensy from aliexpress Make example for this keyboard (after setting up your build environment):

    make handwired/oem_iso_fullsize:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

I didn't manage to make backlighting to work properly, because it looks like I need a LED driver, but if you have this keyboard and already have an LED driver, here are the respective resistor you need to wire to the teensy *Row 0, resistor R132, Pin A1 *Row 1, R131, Pin B5 *Row 2, R130, Pin E4 *Row 3, R129, Pin A2 *Row 4, R128, Pin E5 *Row 5, R127, Pin A7

These line are specifically to my pinout so it's probably not essencial for you #define DIODE_DIRECTION ROW2COL #define LED_CAPS_LOCK_PIN C7 #define LED_SCROLL_LOCK_PIN A3 #define LED_NUM_LOCK_PIN C6 #define BACKLIGHT_PINS { B5, E5, E4, A7, A1, A2 } #define BACKLIGHT_LEVELS 1