qmk_firmware/keyboards/projectkb/alice
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps
rev1 Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
rev2 Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
.noci
alice.c
alice.h
chconf.h
config.h
halconf.h
info.json
mcuconf.h
readme.md
rules.mk

ProjectKeyboard Alice PCB

ProjectKeyboard Alice Keyboard Replacement PCB

Keyboard Maintainer: onefiftynine

Hardware Supported: STM32F072CBT6
Make example for this keyboard (after setting up your build environment):

make projectkb/alice/rev2:default

If you are flashing this keyboard/pcb for the first time:

* Set the dip switch on the reverse of the PCB to 1
* Hit the reset button and then do
* make projectkb/alice:default:dfu-util
* After flashing the keyboard successfully, you can reset the dip switch back to 0

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.