qmk_firmware/keyboards/rart/rart75hs
2022-08-04 08:05:40 +10:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
config.h Move keyboard USB IDs and strings to data driven: R (#17885) 2022-08-04 08:05:40 +10:00
info.json Move keyboard USB IDs and strings to data driven: R (#17885) 2022-08-04 08:05:40 +10:00
rart75hs.c Add Rart75 hotswap and support via (#16619) 2022-03-20 17:05:56 +00:00
rart75hs.h Add Rart75 hotswap and support via (#16619) 2022-03-20 17:05:56 +00:00
readme.md Add Rart75 hotswap and support via (#16619) 2022-03-20 17:05:56 +00:00
rules.mk Add Rart75 hotswap and support via (#16619) 2022-03-20 17:05:56 +00:00

RART 75 Hotswap

RART 75

75% pcb with encoder, based on IMKG (Indonesia Mechanical Keyboard Group)

  • Keyboard Maintainer: Alabahuy
  • Hardware Supported: RART75 PCB, Atmega32a, Type C, Encoders
  • Hardware Availability: Private GB

Make example for this keyboard (after setting up your build environment):

make rart/rart75hs:default

Flashing example for this keyboard:

make rart/rart75hs:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • To Enter the bootloader you can short and hold boot pin, short reset pin, release reset and boot pin.

  • Bootmagic reset, hold down the key at (0,0) in the matrix (ESC) and plug in the keyboard.

  • Bootloader reset on the matrix, hold down key at (0,1) and plug in the keyboard

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.