qmk_firmware/keyboards/work_louder/work_board
2021-09-08 18:10:43 -07:00
..
keymaps [Keyboard] Minor tweaks to Work Board layout (#14351) 2021-09-08 18:10:43 -07:00
config.h [Keyboard] Work Louder board fixup (#14247) 2021-09-02 10:49:44 -07:00
info.json [Keyboard] Add Loop, Nano and Work boards from Work Louder (#12756) 2021-06-10 14:50:24 -07:00
post_config.h [Keyboard] Add Loop, Nano and Work boards from Work Louder (#12756) 2021-06-10 14:50:24 -07:00
readme.md [Keyboard] Add Loop, Nano and Work boards from Work Louder (#12756) 2021-06-10 14:50:24 -07:00
rules.mk Remove Full Bootmagic (#13846) 2021-08-06 23:59:56 -07:00
work_board.c [Keyboard] Work Louder board fixup (#14247) 2021-09-02 10:49:44 -07:00
work_board.h [Keyboard] Add Loop, Nano and Work boards from Work Louder (#12756) 2021-06-10 14:50:24 -07:00

Work Louder Work Board

work

A 40% ortho keyboard with an encoder and per key and underglow RGB

  • Keyboard Maintainer: Work Louder
  • Hardware Supported: An ATmega32u4 based 40% with per key and underglow RGB
  • Hardware Availability: Work Louder

Make example for this keyboard (after setting up your build environment):

make work_louder/work:default

Flashing example for this keyboard:

make work_louder/work:default:flash

Enter bootloader to flash the keyboard, you do either:

* Hold down the key in the left and top most position while plugging in the keyboard
* Hold the RAISE and LOWER keys and hit Q

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.