qmk_firmware/keyboards/nckiibs/waaffle/rev3/config.h
noclew 0ab88f5342
[Keyboard] Vanana, Vaguette Lite, and Waaffle (#11441)
* added Vanana / Vaguette Lite / Waaffle

* changed extra GPIO allocations of Waaffle and Vanana

* Apply suggestions from code review

changed layout name of vaguette Lite / requested by drashna

* Apply suggestions from code review

Requested keymap changes have been made.

* all changes requested by collaborators are made

* RGB config updated / keymap updated

* fixed vaguette lite info.json

* fixed vaguette lite info.json

* fixed vaguette lite info.json

* Apply suggestions from code review

request changes are made

* pre rename h

* vaguettelite reanmed to lowercases

* fixed vanana keymap

* Apply suggestions from code review

* changed Bootmagic key of VaguetteLite as suggested

* Updated via keymap of Vaguette Lite as suggested

* add vaguette lite 6.25 layout

* added vaguette lite noclew keymap

* updated vaguette lite 6.25u keymap description

* updated vanana default keymap

* updated keymap spacing

* reabased from the official repo

* Update keymap.c

fixed vaguette lite keymap

* Apply suggestions from code review

All the requested changes by a collaborator were made.

* updated info.json of Vanana and readme files of Vanana and waffle

* rename LAYOUT_waaffle to LAYOUT_ortho_5x16

Also adjusts the info.json data to put a visual gap between the extension and main PCBs.

* make rules.mk and info.json specific to rev3

Removes nckiibs/waaffle as a build target, as it redirects to the only extant revision in the repository.

* add controller board build targets

Adds build targets for Pro Micro and Elite-C builds, with appropriate defaults for each.

Running `make nckiibs/waaffle/rev3` defaults to a Pro Micro-based build.
2021-03-19 17:12:38 -07:00

138 lines
4.3 KiB
C

/*
Copyright 2020 noclew
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define DEVICE_VER 0x0003
#define PRODUCT Waaffle_rev3
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 10
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F4, B6, B2, B3, B1, F5, F6, F7 }
#define MATRIX_COL_PINS { D3, D2, B5, B4, E6, D7, C6, D4, D0, D1 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
/*rotary encoder setting*/
#define ENCODERS_PAD_A { B7, F1 }
#define ENCODERS_PAD_B { D5, F0 }
#define RGB_DI_PIN C7
#ifdef RGB_DI_PIN
# define RGBLED_NUM 10
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
// # define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
// # define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// # define RGBLIGHT_EFFECT_SNAKE
// # define RGBLIGHT_EFFECT_KNIGHT
// # define RGBLIGHT_EFFECT_CHRISTMAS
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
// # define RGBLIGHT_EFFECT_RGB_TEST
// # define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 6
#define BOOTMAGIC_LITE_COLUMN 0