qmk_firmware/keyboards/handwired/dygma/raise/leds.c
Islam Sharabash ec78acae69
[Keyboard] Adding Dygma Raise (#13543)
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2022-01-09 11:57:08 -08:00

102 lines
3.3 KiB
C

/* Copyright 2018-2021 James Laird-Wah, Islam Sharabash
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quantum.h"
#include "i2c_master.h"
#include "led_tables.h"
#include "rgb_matrix.h"
#include <string.h>
#include "raise.h"
#include "wire-protocol-constants.h"
#include "print.h"
#include "leds.h"
struct __attribute__((packed)) cRGB {
uint8_t r;
uint8_t g;
uint8_t b;
};
#define LEDS_PER_HAND 72
#define LED_BANKS 9
#define LEDS_PER_BANK 8
#define LED_BYTES_PER_BANK (sizeof(cRGB) * LEDS_PER_BANK)
// shifting << 1 is because drivers/chibios/i2c_master.h expects the address
// shifted.
// 0x58 and 0x59 are the addresses defined in dygma/raise/Hand.h
#define I2C_ADDR_LEFT (0x58 << 1)
#define I2C_ADDR_RIGHT (0x59 << 1)
#define I2C_ADDR(hand) ((hand) ? I2C_ADDR_RIGHT : I2C_ADDR_LEFT)
#define LEFT 0
#define RIGHT 1
static cRGB led_state[2 * LEDS_PER_HAND];
void set_all_leds_to(uint8_t r, uint8_t g, uint8_t b) {
uint8_t buf[] = {TWI_CMD_LED_SET_ALL_TO, b, g, r};
i2c_transmit(I2C_ADDR(LEFT), buf, sizeof(buf), I2C_TIMEOUT);
wait_us(10);
i2c_transmit(I2C_ADDR(RIGHT), buf, sizeof(buf), I2C_TIMEOUT);
wait_us(10);
}
void set_led_to(int led, uint8_t r, uint8_t g, uint8_t b) {
int sled = led_map[led];
uint8_t buf[] = {TWI_CMD_LED_SET_ONE_TO, sled & 0x1f, b, g, r};
int hand = (sled >= LEDS_PER_HAND) ? RIGHT : LEFT;
i2c_transmit(I2C_ADDR(hand), buf, sizeof(buf), I2C_TIMEOUT);
wait_us(10);
}
static void set_color(int index, uint8_t r, uint8_t g, uint8_t b) {
int sled = led_map[index];
led_state[sled].r = r;
led_state[sled].g = g;
led_state[sled].b = b;
}
static void set_color_all(uint8_t r, uint8_t g, uint8_t b) {
for (int i = 0; i < DRIVER_LED_TOTAL; i++) set_color(i, r, g, b);
}
static void init(void) {}
static void flush(void) {
uint8_t command[1 + LED_BYTES_PER_BANK];
// SUBTLE(ibash) alternate hands when transmitting led data, otherwise the
// mcu in the hand seems to have trouble keeping up with the i2c
// transmission
for (int bank = 0; bank < LED_BANKS; bank++) {
for (int hand = 0; hand < 2; hand++) {
int addr = I2C_ADDR(hand);
int i = (hand * LEDS_PER_HAND) + (bank * LEDS_PER_BANK);
uint8_t *bank_data = (uint8_t *)&led_state[i];
command[0] = TWI_CMD_LED_BASE + bank;
memcpy(&command[1], bank_data, LED_BYTES_PER_BANK);
i2c_transmit(addr, command, sizeof(command), I2C_TIMEOUT);
// delay to prevent issues with the i2c bus
wait_us(10);
}
}
}
const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .set_color = set_color, .set_color_all = set_color_all};