qmk_firmware/keyboards/studiokestra/cascade
2021-12-01 21:13:00 +11:00
..
keymaps [Keyboard] Add Studio Kestra Cascade PCB (#12704) 2021-05-13 20:54:10 -07:00
cascade.c [Keyboard] Add Studio Kestra Cascade PCB (#12704) 2021-05-13 20:54:10 -07:00
cascade.h [Keyboard] Add Studio Kestra Cascade PCB (#12704) 2021-05-13 20:54:10 -07:00
config.h [Keyboard] Add Studio Kestra Cascade PCB (#12704) 2021-05-13 20:54:10 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] Add Studio Kestra Cascade PCB (#12704) 2021-05-13 20:54:10 -07:00
rules.mk Tidy up SLEEP_LED_ENABLE rules (#15362) 2021-12-01 21:13:00 +11:00

Cascade

60% universal hotswap/solder PCB with USB-C that supports multiple commonly used layouts.

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

  • Hold the top-left key (typically Esc) while plugging in the USB cable, OR
  • While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
  • With the default layout, toggle Layer 1 and press the ESC key.

Compiling Firmware

Make example for this keyboard (after setting up your build environment):

make studiokestra/cascade:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.