qmk_firmware/keyboards/ergodox_ez
Erez Zukerman b5e7589bf9 disables RGB Matrix for now
just to see if that's why the board doesn't work. And it is... With this, the board works.
2018-05-09 09:53:32 -04:00
..
keymaps Update to drashna files (#2587) 2018-03-25 13:01:15 -07:00
util Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
190hotfix.sh Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
config.h a quick attempt 2018-05-09 09:43:36 -04:00
ergodox_ez.c disables RGB Matrix for now 2018-05-09 09:53:32 -04:00
ergodox_ez.h Add pretty layout to all ergodox clones (#2686) 2018-04-21 17:00:43 -04:00
i2cmaster.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
info.json Add pretty layout to all ergodox clones (#2686) 2018-04-21 17:00:43 -04:00
matrix.c Don't "unselect" left-hand rows 2017-12-10 00:40:41 -05:00
readme.md Syntax update (#2660) 2018-04-24 09:49:34 -07:00
rules.mk disables RGB Matrix for now 2018-05-09 09:53:32 -04:00
twimaster.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.