qmk_firmware/keyboards/kprepublic/bm980hsrgb
Ryan 5e4b076af3
Remove legacy keycodes, part 5 (#18710)
* `KC_SLCK` -> `KC_SCRL`
* `KC_NLCK` -> `KC_NUM`
2022-10-15 22:29:43 +01:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
bm980hsrgb.c [Keyboard] Add KPrepublic bm980hsrgb support (#14724) 2021-12-24 17:47:21 -08:00
bm980hsrgb.h [Keyboard] Add KPrepublic bm980hsrgb support (#14724) 2021-12-24 17:47:21 -08:00
config.h Change DRIVER_LED_COUNT to {LED,RGB}_MATRIX_LED_COUNT (#18399) 2022-09-23 22:46:23 +10:00
info.json Move keyboard USB IDs and strings to data driven: K (#17846) 2022-08-03 17:03:47 +10:00
readme.md [Keyboard] Add KPrepublic bm980hsrgb support (#14724) 2021-12-24 17:47:21 -08:00
rules.mk [Keyboard] Add KPrepublic bm980hsrgb support (#14724) 2021-12-24 17:47:21 -08:00

BM980HSRGB

BM980HSRGB

A 1800, hotswap, in switch RGB keyboard from KPRepublic.

Make example for this keyboard (after setting up your build environment):

make kprepublic/bm980hsrgb:default

Flashing example for this keyboard:

make kprepublic/bm980hsrgb:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in one of 3 ways:

  • Short the two-pad footprint beneath the f12 key while the board is plugged in
  • Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
  • Hold the Esc key while connecting the USB cable (also erases persistent settings)