qmk_firmware/keyboards/handwired/tritium_numpad
James Young 4b453dca92
Remove MIDI Configuration boilerplate (#11151)
* remove keyboard-level instances of `MIDI_ENABLE = no`

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e  '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* fix case-sensitivity issues on MIDI_ENABLE

Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```

* replace `# MIDI controls` with `# MIDI support`

Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```

* align inline comments

Aligns the inline comments to the length used by the QMK AVR rules.mk template.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes           # MIDI support;g'  {} +
```

* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```

* remove MIDI configuration boilerplate from keyboard config.h files

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-16 06:51:13 +10:00
..
keymaps [Bug] Develop - Change uint32_t to layer_state_t (#13596) 2021-07-19 09:50:55 -07:00
config.h Refactor to use led config - Part 6 (#12115) 2021-03-10 22:48:18 +00:00
info.json [Keyboard] Added 3d printable, handwired numpad by tritiumfusion (#6125) 2019-06-24 23:11:51 -07:00
readme.md [Keyboard] Added 3d printable, handwired numpad by tritiumfusion (#6125) 2019-06-24 23:11:51 -07:00
rules.mk Remove MIDI Configuration boilerplate (#11151) 2021-08-16 06:51:13 +10:00
tritium_numpad.c Refactor to use led config - Part 6 (#12115) 2021-03-10 22:48:18 +00:00
tritium_numpad.h [Keyboard] Added 3d printable, handwired numpad by tritiumfusion (#6125) 2019-06-24 23:11:51 -07:00

Tritium Numpad

Keyboard Maintainer: QMK Community
Hardware Supported: Handwired 6x4 numpads using promicro controller
Hardware Availability: https://www.thingiverse.com/thing:2855938

Wiring is accomplished on the Pro Micro board using the following pins as rows:

  • D2 : Row 1
  • D3 : Row 2
  • D4 : Row 3
  • D5 : Row 4
  • D6 : Row 5
  • D7 : Row 6

and the following pins as columns:

  • A3 : Col 1
  • A1 : Col 2
  • D15 : Col 3
  • D16 : Col 4

Make example for this keyboard (after setting up your build environment):

make tritium_numpad:default

Bootmagic is enabled. Press the key at 0,0 (usually escape or numlock in the top left corner) while plugging the keyboard in to jump to bootloader.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.