qmk_firmware/keyboards/zinc/keymaps/toshi0383/rules.mk
James Young fced377ac0
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00

137 lines
4.4 KiB
Makefile

# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
define ZINC_CUSTOMISE_MSG
$(info Zinc customize)
$(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
$(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE))
$(info - LED_RGB_CONT=$(LED_RGB_CONT))
$(info - RGB_MATRIX=$(RGB_MATRIX))
$(info - LED_ANIMATION=$(LED_ANIMATIONS))
$(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
endef
# Zinc keyboard customize
LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight)
LED_BOTH_ENABLE = no # LED backlight and underglow
LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc
RGB_MATRIX = no # RGB LED Matrix
RGB_MATRIX_SPLIT_RIGHT = no # RGB Matrix for RIGHT Hand
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
Link_Time_Optimization = no # if firmware size over limit, try this option
#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
#### Do not enable these with audio at the same time.
### Zinc keyboard 'default' keymap: convenient command line option
## make ZINC=<options> zinc:defualt
## option= back | under | both | cont | matrix | na | ios
## ex.
## make ZINC=under zinc:defualt
## make ZINC=under,ios zinc:defualt
## make ZINC=back zinc:default
## make ZINC=back,na zinc:default
## make ZINC=back,ios zinc:default
ifneq ($(strip $(ZINC)),)
ifeq ($(findstring back,$(ZINC)), back)
LED_BACK_ENABLE = yes
endif
ifeq ($(findstring under,$(ZINC)), under)
LED_UNDERGLOW_ENABLE = yes
endif
ifeq ($(findstring both,$(ZINC)), both)
LED_BOTH_ENABLE = yes
endif
ifeq ($(findstring cont,$(ZINC)), cont)
LED_RGB_CONT = yes
endif
ifeq ($(findstring matrix,$(ZINC)), matrix)
RGB_MATRIX = yes
endif
ifeq ($(findstring right,$(ZINC)), right)
RGB_MATRIX_SPLIT_RIGHT = yes
endif
ifeq ($(findstring na,$(ZINC)), na)
LED_ANIMATIONS = no
endif
ifeq ($(findstring ios,$(ZINC)), ios)
IOS_DEVICE_ENABLE = yes
endif
$(eval $(call ZINC_CUSTOMISE_MSG))
$(info )
endif
ifeq ($(strip $(LED_BACK_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
OPT_DEFS += -DRGBLED_BOTH
$(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE)
else
OPT_DEFS += -DRGBLED_BACK
endif
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
else
RGBLIGHT_ENABLE = no
endif
ifeq ($(strip $(LED_BOTH_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
OPT_DEFS += -DRGBLED_BOTH
endif
ifeq ($(strip $(LED_RGB_CONT)), yes)
OPT_DEFS += -DRGBLED_CONT
endif
ifeq ($(strip $(RGB_MATRIX)), yes)
RGBLIGHT_ENABLE = no
RGB_MATRIX_ENABLE = WS2812
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
endif
ifeq ($(strip $(LED_ANIMATIONS)), yes)
# OPT_DEFS += -DRGBLIGHT_ANIMATIONS
OPT_DEFS += -DLED_ANIMATIONS
endif
ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes)
OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT
endif
ifeq ($(strip $(Link_Time_Optimization)),yes)
EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
endif
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# Uncomment these for debugging
# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
# $(info -- OPT_DEFS=$(OPT_DEFS))
# $(info )