qmk_firmware/drivers/haptic/haptic.c
James Young c66df16644
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00

356 lines
9.5 KiB
C

/* Copyright 2019 ishtob
* Driver for haptic feedback written for QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "haptic.h"
#include "eeconfig.h"
#include "progmem.h"
#include "debug.h"
#ifdef DRV2605L
# include "DRV2605L.h"
#endif
#ifdef SOLENOID_ENABLE
# include "solenoid.h"
#endif
haptic_config_t haptic_config;
void haptic_init(void) {
debug_enable = 1; // Debug is ON!
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
haptic_config.raw = eeconfig_read_haptic();
#ifdef SOLENOID_ENABLE
solenoid_set_dwell(haptic_config.dwell);
#endif
if ((haptic_config.raw == 0)
#ifdef SOLENOID_ENABLE
|| (haptic_config.dwell == 0)
#endif
) {
// this will be called, if the eeprom is not corrupt,
// but the previous firmware didn't have haptic enabled,
// or the previous firmware didn't have solenoid enabled,
// and the current one has solenoid enabled.
haptic_reset();
}
#ifdef SOLENOID_ENABLE
solenoid_setup();
dprintf("Solenoid driver initialized\n");
#endif
#ifdef DRV2605L
DRV_init();
dprintf("DRV2605 driver initialized\n");
#endif
eeconfig_debug_haptic();
}
void haptic_task(void) {
#ifdef SOLENOID_ENABLE
solenoid_check();
#endif
}
void eeconfig_debug_haptic(void) {
dprintf("haptic_config eprom\n");
dprintf("haptic_config.enable = %d\n", haptic_config.enable);
dprintf("haptic_config.mode = %d\n", haptic_config.mode);
}
void haptic_enable(void) {
haptic_config.enable = 1;
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_disable(void) {
haptic_config.enable = 0;
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_toggle(void) {
if (haptic_config.enable) {
haptic_disable();
} else {
haptic_enable();
}
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_feedback_toggle(void) {
haptic_config.feedback++;
if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX) haptic_config.feedback = KEY_PRESS;
xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_buzz_toggle(void) {
bool buzz_stat = !haptic_config.buzz;
haptic_config.buzz = buzz_stat;
haptic_set_buzz(buzz_stat);
}
void haptic_mode_increase(void) {
uint8_t mode = haptic_config.mode + 1;
#ifdef DRV2605L
if (haptic_config.mode >= drv_effect_max) {
mode = 1;
}
#endif
haptic_set_mode(mode);
}
void haptic_mode_decrease(void) {
uint8_t mode = haptic_config.mode - 1;
#ifdef DRV2605L
if (haptic_config.mode < 1) {
mode = (drv_effect_max - 1);
}
#endif
haptic_set_mode(mode);
}
void haptic_dwell_increase(void) {
#ifdef SOLENOID_ENABLE
int16_t next_dwell = ((int16_t)haptic_config.dwell) + SOLENOID_DWELL_STEP_SIZE;
if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
// if it's already at max, we wrap back to min
next_dwell = SOLENOID_MIN_DWELL;
} else if (next_dwell > SOLENOID_MAX_DWELL) {
// if we overshoot the max, then cap at max
next_dwell = SOLENOID_MAX_DWELL;
}
solenoid_set_dwell(next_dwell);
#else
int16_t next_dwell = ((int16_t)haptic_config.dwell) + 1;
#endif
haptic_set_dwell(next_dwell);
}
void haptic_dwell_decrease(void) {
#ifdef SOLENOID_ENABLE
int16_t next_dwell = ((int16_t)haptic_config.dwell) - SOLENOID_DWELL_STEP_SIZE;
if (haptic_config.dwell <= SOLENOID_MIN_DWELL) {
// if it's already at min, we wrap to max
next_dwell = SOLENOID_MAX_DWELL;
} else if (next_dwell < SOLENOID_MIN_DWELL) {
// if we go below min, then we cap to min
next_dwell = SOLENOID_MIN_DWELL;
}
solenoid_set_dwell(next_dwell);
#else
int16_t next_dwell = ((int16_t)haptic_config.dwell) - 1;
#endif
haptic_set_dwell(next_dwell);
}
void haptic_reset(void) {
haptic_config.enable = true;
uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
haptic_config.feedback = feedback;
#ifdef DRV2605L
uint8_t mode = HAPTIC_MODE_DEFAULT;
haptic_config.mode = mode;
#endif
#ifdef SOLENOID_ENABLE
uint8_t dwell = SOLENOID_DEFAULT_DWELL;
haptic_config.dwell = dwell;
haptic_config.buzz = SOLENOID_DEFAULT_BUZZ;
solenoid_set_dwell(dwell);
#else
// This is to trigger haptic_reset again, if solenoid is enabled in the future.
haptic_config.dwell = 0;
haptic_config.buzz = 0;
#endif
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
xprintf("haptic_config.mode = %u\n", haptic_config.mode);
}
void haptic_set_feedback(uint8_t feedback) {
haptic_config.feedback = feedback;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
}
void haptic_set_mode(uint8_t mode) {
haptic_config.mode = mode;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.mode = %u\n", haptic_config.mode);
}
void haptic_set_amplitude(uint8_t amp) {
haptic_config.amplitude = amp;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.amplitude = %u\n", haptic_config.amplitude);
#ifdef DRV2605L
DRV_amplitude(amp);
#endif
}
void haptic_set_buzz(uint8_t buzz) {
haptic_config.buzz = buzz;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
}
void haptic_set_dwell(uint8_t dwell) {
haptic_config.dwell = dwell;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
}
uint8_t haptic_get_mode(void) {
if (!haptic_config.enable) {
return false;
}
return haptic_config.mode;
}
uint8_t haptic_get_feedback(void) {
if (!haptic_config.enable) {
return false;
}
return haptic_config.feedback;
}
uint8_t haptic_get_dwell(void) {
if (!haptic_config.enable) {
return false;
}
return haptic_config.dwell;
}
void haptic_enable_continuous(void) {
haptic_config.cont = 1;
xprintf("haptic_config.cont = %u\n", haptic_config.cont);
eeconfig_update_haptic(haptic_config.raw);
#ifdef DRV2605L
DRV_rtp_init();
#endif
}
void haptic_disable_continuous(void) {
haptic_config.cont = 0;
xprintf("haptic_config.cont = %u\n", haptic_config.cont);
eeconfig_update_haptic(haptic_config.raw);
#ifdef DRV2605L
DRV_write(DRV_MODE, 0x00);
#endif
}
void haptic_toggle_continuous(void) {
#ifdef DRV2605L
if (haptic_config.cont) {
haptic_disable_continuous();
} else {
haptic_enable_continuous();
}
eeconfig_update_haptic(haptic_config.raw);
#endif
}
void haptic_cont_increase(void) {
uint8_t amp = haptic_config.amplitude + 10;
if (haptic_config.amplitude >= 120) {
amp = 120;
}
haptic_set_amplitude(amp);
}
void haptic_cont_decrease(void) {
uint8_t amp = haptic_config.amplitude - 10;
if (haptic_config.amplitude < 20) {
amp = 20;
}
haptic_set_amplitude(amp);
}
void haptic_play(void) {
#ifdef DRV2605L
uint8_t play_eff = 0;
play_eff = haptic_config.mode;
DRV_pulse(play_eff);
#endif
#ifdef SOLENOID_ENABLE
solenoid_fire();
#endif
}
bool process_haptic(uint16_t keycode, keyrecord_t *record) {
if (keycode == HPT_ON && record->event.pressed) {
haptic_enable();
}
if (keycode == HPT_OFF && record->event.pressed) {
haptic_disable();
}
if (keycode == HPT_TOG && record->event.pressed) {
haptic_toggle();
}
if (keycode == HPT_RST && record->event.pressed) {
haptic_reset();
}
if (keycode == HPT_FBK && record->event.pressed) {
haptic_feedback_toggle();
}
if (keycode == HPT_BUZ && record->event.pressed) {
haptic_buzz_toggle();
}
if (keycode == HPT_MODI && record->event.pressed) {
haptic_mode_increase();
}
if (keycode == HPT_MODD && record->event.pressed) {
haptic_mode_decrease();
}
if (keycode == HPT_DWLI && record->event.pressed) {
haptic_dwell_increase();
}
if (keycode == HPT_DWLD && record->event.pressed) {
haptic_dwell_decrease();
}
if (keycode == HPT_CONT && record->event.pressed) {
haptic_toggle_continuous();
}
if (keycode == HPT_CONI && record->event.pressed) {
haptic_cont_increase();
}
if (keycode == HPT_COND && record->event.pressed) {
haptic_cont_decrease();
}
if (haptic_config.enable) {
if (record->event.pressed) {
// keypress
if (haptic_config.feedback < 2) {
haptic_play();
}
} else {
// keyrelease
if (haptic_config.feedback > 0) {
haptic_play();
}
}
}
return true;
}
void haptic_shutdown(void) {
#ifdef SOLENOID_ENABLE
solenoid_shutdown();
#endif
}