qmk_firmware/keyboards/kprepublic/bm80hsrgb
2023-04-08 18:08:08 +10:00
..
keymaps Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211) 2023-04-03 15:32:47 +10:00
bm80hsrgb.c Move TKL layouts to data driven (#20337) 2023-04-05 15:53:45 +10:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00
readme.md rename kprepublic bm keyboards to have a standardized naming format (#15047) 2021-11-18 08:37:23 +11:00
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

BM80HSRGB

BM80HSRGB

A tkl, hotswap, in switch RGB keyboard from KPRepublic.

Make example for this keyboard (after setting up your build environment):

make kprepublic/bm80hsrgb:default

Flashing example for this keyboard:

make kprepublic/bm80hsrgb:default:flash

To reset the board into bootloader mode, do one of the following:

  • Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
  • Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
  • Hold the Esc key while connecting the USB cable (also erases persistent settings)

All of the RGB matrix effects are enabled by default. To disable specific ones, see this section for more information.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.