qmk_firmware/keyboards/40percentclub/i75
2021-12-09 16:05:44 +11:00
..
keymaps/default Remove empty config.h from default-ish keymaps (#15429) 2021-12-09 16:00:55 +11:00
promicro Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
teensy2 Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
config.h Remove unused IS_COMMAND() instances and Magic Key definitions (#14610) 2021-09-26 02:57:20 -07:00
i75.c Remove empty override functions (#14312) 2021-09-05 21:36:31 +01:00
i75.h Keyboard: Initial i75 port (#4553) 2018-12-05 13:56:43 -08:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md Keyboard: Initial i75 port (#4553) 2018-12-05 13:56:43 -08:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

i75

i75

5x15 grid layout, multiple controllers supported

  • Pro Micro
  • PJRC Teensy 2.0
  • PJRC Teensy LC/3.2 (NB: Not currently ported)

The matrix is a 9x9 grid. This uses all of the available pins on the Pro Micro. The other controllers have pins left over. The serial pins and pins connected to LEDs were avoided if possible.

Keyboard Maintainer: QMK Community
Hardware Supported: i75 PCB
Hardware Availability: i75 project on 40% Keyboards

Make example for this keyboard (after setting up your build environment):

make 40percentclub/i75:default

If you would like to use one of the alternative controllers:

make 40percentclub/i75/promicro:default
make 40percentclub/i75/teensy2:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.