tgrosinger/zmk
1
0
Fork 0
Code Actions Packages
tgrosinger-keyboards
zmk/app/boards/shields/leeloo_micro/leeloo_micro.keymap

151 lines
5.5 KiB
Plaintext
Raw Permalink Normal View History

feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
/*
* Copyright (c) 2023 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
#include <behaviors.dtsi>
#include <dt-bindings/zmk/outputs.h>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
#include <dt-bindings/zmk/rgb.h>
// Layers
#define QW_M 0 // Main
#define QW_L 1 // Lower
#define QW_R 2 // Raise
#define QW_A 3 // Adjust
#define QC_N 4 // Number Pad
#define QC_B 5 // Firmware
// Short versions
#define BT0 BT_SEL 0
#define BT1 BT_SEL 1
#define BT2 BT_SEL 2
#define BT3 BT_SEL 3
#define BT4 BT_SEL 4
#define BOOTLDR &bootloader
#define RGBON &rgb_ug RGB_ON
#define RGBOFF &rgb_ug RGB_OFF
#define RGBTOG &rgb_ug RGB_TOG
#define RGBHUI &rgb_ug RGB_HUI
#define RGBHUD &rgb_ug RGB_HUD
#define RGBSAI &rgb_ug RGB_SAI
#define RGBSAD &rgb_ug RGB_SAD
#define RGBBRI &rgb_ug RGB_BRI
#define RGBBRD &rgb_ug RGB_BRD
#define RGBEFF &rgb_ug RGB_EFF
/*
* Assign the cs-gpios pin to 4.
* Uncomment these next few lines if implementing nice!view Displays.
*/
//nice_view_spi: &spi0 {
// cs-gpios = <&pro_micro 4 GPIO_ACTIVE_HIGH>;
//};
/ {
conditional_layers {
compatible = "zmk,conditional-layers";
adjust_layer {
if-layers = <QW_L QW_R>;
then-layer = <QW_A>;
};
};
combos {
compatible = "zmk,combos";
combo_esc {
timeout-ms = <50>;
key-positions = <0 1>;
layers = <QW_M>;
bindings = <&kp ESC>;
};
};
keymap {
compatible = "zmk,keymap";
default_layer {
refactor(keymaps): Rename layer label to "display-name" Changed the property used to define a layer name for displays from "label" (which affects other things in Zephyr and is deprecated) to "display-name". (It cannot be named simply "name", because that has special meaning in newer versions of the devicetree compiler.) "label" is still supported as a fallback, so no changes need to be made to existing keymaps.
2023-10-06 18:04:41 -07:00
display-name = " QWERTY";
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
bindings = <
&kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P
&kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI
&mt LSFT Z &kp X &kp C &kp V &kp B &mo QC_N &kp RGUI &kp N &kp M &kp COMMA &kp DOT &mt RSFT FSLH
&kp LALT &kp LCTRL &lt 1 RET &lt 2 MINUS &lt 2 EQUAL &lt 1 SPACE &kp BSPC &mo QC_B
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP>;
};
lower_layer {
refactor(keymaps): Rename layer label to "display-name" Changed the property used to define a layer name for displays from "label" (which affects other things in Zephyr and is deprecated) to "display-name". (It cannot be named simply "name", because that has special meaning in newer versions of the devicetree compiler.) "label" is still supported as a fallback, so no changes need to be made to existing keymaps.
2023-10-06 18:04:41 -07:00
display-name = " Lower";
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
bindings = <
&kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0
&trans &trans &trans &trans &trans &trans &trans &trans &trans &kp QUOT
&kp LSHFT &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp RSHFT
&trans &trans &trans &trans &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP>;
};
raise_layer {
refactor(keymaps): Rename layer label to "display-name" Changed the property used to define a layer name for displays from "label" (which affects other things in Zephyr and is deprecated) to "display-name". (It cannot be named simply "name", because that has special meaning in newer versions of the devicetree compiler.) "label" is still supported as a fallback, so no changes need to be made to existing keymaps.
2023-10-06 18:04:41 -07:00
display-name = " Raise";
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
bindings = <
&kp TAB &trans &trans &trans &trans &kp PG_UP &kp HOME &kp UP &kp END &kp BSLH
&kp CAPS &trans &trans &trans &trans &kp PG_DN &kp LEFT &kp DOWN &kp RIGHT &kp GRAVE
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &mt RSFT TILDE
&trans &trans &trans &trans &trans &trans &kp DEL &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP>;
};
adjust_layer {
refactor(keymaps): Rename layer label to "display-name" Changed the property used to define a layer name for displays from "label" (which affects other things in Zephyr and is deprecated) to "display-name". (It cannot be named simply "name", because that has special meaning in newer versions of the devicetree compiler.) "label" is still supported as a fallback, so no changes need to be made to existing keymaps.
2023-10-06 18:04:41 -07:00
display-name = " Adjust";
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
bindings = <
&kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &trans &trans &trans &trans &trans
&kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &trans &trans &trans &trans &trans
&kp F11 &kp F12 &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP>;
};
numpad_layer {
refactor(keymaps): Rename layer label to "display-name" Changed the property used to define a layer name for displays from "label" (which affects other things in Zephyr and is deprecated) to "display-name". (It cannot be named simply "name", because that has special meaning in newer versions of the devicetree compiler.) "label" is still supported as a fallback, so no changes need to be made to existing keymaps.
2023-10-06 18:04:41 -07:00
display-name = " NumPad";
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
bindings = <
&trans &none &none &none &none &kp SLASH &kp N7 &kp N8 &kp N9 &kp MINUS
RGBON RGBTOG RGBHUI RGBSAI RGBBRI &kp ASTRK &kp N4 &kp N5 &kp N6 &kp PLUS
RGBOFF RGBEFF RGBHUD RGBSAD RGBBRD &trans &trans &none &kp N1 &kp N2 &kp N3 &kp EQUAL
&trans &trans &trans &trans &trans &kp N0 &kp DOT &none
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP>;
};
ble_layer {
refactor(keymaps): Rename layer label to "display-name" Changed the property used to define a layer name for displays from "label" (which affects other things in Zephyr and is deprecated) to "display-name". (It cannot be named simply "name", because that has special meaning in newer versions of the devicetree compiler.) "label" is still supported as a fallback, so no changes need to be made to existing keymaps.
2023-10-06 18:04:41 -07:00
display-name = " BLE";
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes * Add Leeloo v2 * Leeloo-Micro v1 updates to support Zephyr 3.2 * Refactored for new Encoder Configuration Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
2023-07-17 14:26:27 -07:00
bindings = <
&bt BT0 &bt BT1 &bt BT2 &bt BT3 &bt BT4 &bt BT0 &bt BT1 &bt BT2 &bt BT3 &bt BT4
BOOTLDR &sys_reset &trans &trans &trans &trans &trans &trans &sys_reset BOOTLDR
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &bt BT_CLR &trans &trans &trans &trans &bt BT_CLR &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP>;
};
};
};
Copy Permalink