tgrosinger/zmk
1
0
Fork 0
Code Actions Packages
2,457 Commits 1 Branch 0 Tags 22 MiB
49e0721f78
Commit Graph

2457 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Cem Aksoylar
3d938033b0 feat(docs): Note GPIO flags and add examples 2023-09-02 20:49:19 -07:00
Cem Aksoylar
1e11e84d0d fix(docs): Fix row/col comments in matrix examples 2023-09-02 20:49:19 -07:00
Cem Aksoylar
fd47965838 fix(docs): Remove diode-direction from direct GPIO driver 2023-09-02 20:45:29 -07:00
Mikhail Stralenia
185457bc11
fix(shields): leeloo - proper encoder status for split encoders. 2023-08-29 08:53:30 -07:00
Peter Johanson
a92a4967aa fix(sensors): Only accept data once per behavior. 
* Don't accept data for the same behavior on multiple layers more than
  once, to avoid duplicate/extraneous triggers.
 2023-08-27 19:52:03 -07:00
Peter Johanson
dcb1f8f135 fix(docs): Update docs about split encoder support 2023-08-27 19:52:03 -07:00
Stephen Wan
9d44229800 feature(split): add support for sensors from peripheral 
This commit adds a new GATT characteristics on the peripheral side
and wires it up to read sensor values. The central side subscribes
to this new characteristics and replays sensor values on its side.

Co-authored-by: Peter Johanson <peter@peterjohanson.com>
 2023-08-27 19:52:03 -07:00
Seth Milliken
c957348e61 fix(docs): detail overriding the led_strip chain-length property 
Quite a few people have struggled with setting the correct
`chain-length` for their `led_strip`. For some, this is their first time
needing to change a pre-defined devicetree property, and so they aren't
familiar with the technique. I commonly see folks adding a duplicate of
the entire `*.overlay` file with only the `chain-length` value changed.
Having clear documentation for this specific application of the property
override technique could help forestall these problems, and give those
of us helping out in Discord something to easily reference.
 2023-08-15 11:04:01 +03:00
Jorge Villalobos
d17c473d45
feat(docs): Improve parameterized macros docs 2023-08-02 09:57:00 -07:00
Xudong Zheng
e65a7e3075 fix(battery): change nRF52 ADC gain 
With ADC pin, maximum 3.6V input needs gain 1/6 to be less than the 0.6V
reference.

With VDDHDIV5, maximum 6V input corresponds to 1.2V so gain 1/2 will be less
than the 0.6V reference and be slightly more precise.
 2023-07-29 23:04:35 -07:00
Xudong Zheng
cb9c573b53 refactor(underglow): turn underglow off in low priority work queue 2023-07-24 17:04:51 -07:00
Xudong Zheng
9a963abfc8 refactor: use low priority workqueue for underglow and battery reporting 
Blocking operations on the high priority system workqueue may result in
deadlocks, particularly when Bluetooth is in use.
 2023-07-24 17:04:51 -07:00
Peter Johanson
f743d57ff1 feat(shields): Add splitkb.com Aurora Sofle 
* Add new shield for splitkb.com Aurora Sofle, supporting
  keys, encoder(s), displays, and RGB.

Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
 2023-07-22 23:16:49 -07:00
Peter Johanson
147f7f23dc fix(shields): Make settings_reset more flexible. 
* Don't reference `pro_micro` nexus node in settings_reset
  so it can be used with other controllers.
* Use mock kscan node instead.
 2023-07-21 10:41:23 -07:00
Peter Johanson
5f6a13413b fix(bluetooth): Split improvements 
* Proper usage of bt_uuid_cmp.
* Central's don't start scanning for peripherals if
  `ZMK_BLE_CLEAR_BONDS_ON_START` is enabled.
* Split peripherals don't advertize if
  `ZMK_BLE_CLEAR_BONDS_ON_START` is enabled.
 2023-07-21 10:41:23 -07:00
Peter Johanson
54c2e8e155 feat: Add more logging to peripheral settings. 2023-07-21 10:41:23 -07:00
Peter Johanson
ed400c4feb fix(bluetooth): Corrected use of bt_addr_le_cmp 
* Properly compare to zero when comparing LE addresses.
 2023-07-21 10:41:23 -07:00
Peter Johanson
73e1b526d5 fix(bluetooth): Properly clear peripheral slots 
* When the clear bonds Kconfig is set, also clear peripheral
  address slots addresses from settings as well.
 2023-07-21 10:41:23 -07:00
dependabot[bot]
b945ffe943 chore(deps): bump semver from 5.7.1 to 5.7.2 in /docs 
Bumps [semver](https://github.com/npm/node-semver) from 5.7.1 to 5.7.2.
- [Release notes](https://github.com/npm/node-semver/releases)
- [Changelog](https://github.com/npm/node-semver/blob/v5.7.2/CHANGELOG.md)
- [Commits](https://github.com/npm/node-semver/compare/v5.7.1...v5.7.2)

---
updated-dependencies:
- dependency-name: semver
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>
 2023-07-20 09:52:20 -07:00
Maciej Konieczny aka narf
cec2061dad fix(docs): Fix typos in parameterized macros docs. 2023-07-19 15:42:35 -07:00
Cem Aksoylar
ee1e135104
fix: Proper battery sensor Kconfig dependencies. 
Properly make the battery sensor Kconfig symbols depend
on `SENSOR` config, and minor battery reporting Kconfig
symbol dependency fix.
 2023-07-19 02:21:09 -04:00
Nick Winans
51a4be8935 fix(displays): Don't enable built-in widget configs by default 2023-07-19 00:13:16 -06:00
Nick Winans
18a2b76bf0 feat(nice!view): Custom widgets 2023-07-19 00:13:16 -06:00
NAHO
f3110d1d1e
fix(docs): Fix README punctuation and add license link 2023-07-17 15:23:22 -07:00
ClicketySplit
aaf9958d86
feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes 
* Add Leeloo v2
* Leeloo-Micro v1 updates to support Zephyr 3.2
* Refactored for new Encoder Configuration

Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
 2023-07-17 17:26:27 -04:00
フィルターペーパー
bbb27ac027
feat(docs): Note that UF2 drive unmounts after flashing (#1859) 
Add a note about the UF2 drive that automatically unmounts itself
to restart, which may surprise some new users.
 2023-07-06 10:39:08 -07:00
Kyle McCreery
3772ecb04e
fix(boards): Update pillbug_defconfig to enable pinctrl 2023-07-05 10:50:19 -06:00
Peter Johanson
b259d5a22e fix(sensors): Sensor rotate behavior fix for layers. 
* Properly return transparent value when processing mode
  for higher disabled layers means the processing is ignored.
 2023-06-20 17:36:37 -06:00
Peter Johanson
805dd4a53b feat(behaviors): Support parameterized macros. 
* Add two new compatibles for macros that
  take one or two parameters when bound in
  a keymap.
* Use `&macro_param_1to1`, `&macro_param_1to2`, `&macro_param_2to1`,
  and `&macro_param_2to2` control entries in the bindings for the macro
  to have the next binding entry have it's values substituted.

Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
 2023-06-20 11:19:28 -06:00
Xudong Zheng
e686fce4d9 refactor(split): allow central to define connection parameters 
Fixes #1614
 2023-06-19 20:48:31 -06:00
Peter Johanson
5763558a02 feat(blog): Add post about sensor refactor. 
* Document changed configuration, support for other Zephyr
  drivers, next steps.

Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
 2023-06-18 20:45:06 -06:00
Peter Johanson
753802cd79 fix(sensors): Clean ups based on code review. 2023-06-18 20:45:06 -06:00
Peter Johanson
3a91b32513 refactor(sensors): Use "sensor index" consistently 2023-06-18 20:45:06 -06:00
Peter Johanson
8b29f6d345 refactor(sensors): Split data handling from triggers. 
* All sensor behaviors should see sensor data, then selectively
  only have some trigger their behaviors.
 2023-06-18 20:45:06 -06:00
Peter Johanson
d781ec795b refactor(bluetooth): Add battery reporting config. 
* Add dedicated battery reporting Kconfig that is `imply`d by
  enabling ZMK_BLE.
 2023-06-18 20:45:06 -06:00
Peter Johanson
f8aaaff556 refactor(shields): Updated ZMK Uno encoder config. 
* Move to new steps/triggers-per-rotation config.
* Leverage QDEC Nordic driver when used on Nordic DK.
 2023-06-18 20:45:06 -06:00
Peter Johanson
621d946d29 refactor(bluetooth): Bump HoG stack size. 
* Bump the default stack size for the HoG processing thread
  to avoid issues w/ some pathways.
 2023-06-18 20:45:06 -06:00
Peter Johanson
f0f7e2081b refactor(config): Select SENSOR as needed. 
* Don't force on SENSOR Kconfig setting unless
  needed based on the detected DT.
 2023-06-18 20:45:06 -06:00
Peter Johanson
295ed83409 refactor(sensors): ec11 rotation sensor value in degrees. 
* Add new `steps` property to the `aips,ec11` binding, to make
  the driver properly report degrees in the rotation delta channel.
* Handle old sensor values in sensor rotate behavior.
 2023-06-18 20:45:06 -06:00
Peter Johanson
2244bd3d81 refactor(sensors): Sensor event channel data, resolution tweaks. 
* Refactor sensor events to include channel data,
  necessary for prop split encoders, and avoiding duplicate calls,
  to fetch channel data twice, etc.
* More consistent behavior driver API.
* Allow setting triggers per resolution at the behavior level optionally.
 2023-06-18 20:45:06 -06:00
Joel Spadin
dcf5e75fa6 fix(boards): Bump nRF5340 DK I2C buffer size 
Increased the I2C buffer size again, since it needs to be at least 641
to support 128x64 displays.
 2023-06-18 14:57:06 -06:00
Joel Spadin
9ff1eaeb5a fix: Enable BT_TINYCRYPT_ECC when using HCI 
BT_TINYCRYPT_ECC is required for BT_SMP_SC_PAIR_ONLY to work on setups
that use BT HCI like the nRF5340.
 2023-06-18 14:52:45 -06:00
dependabot[bot]
9d714c0b69 chore(deps-dev): bump webpack from 5.80.0 to 5.86.0 in /docs 
Bumps [webpack](https://github.com/webpack/webpack) from 5.80.0 to 5.86.0.
- [Release notes](https://github.com/webpack/webpack/releases)
- [Commits](https://github.com/webpack/webpack/compare/v5.80.0...v5.86.0)

---
updated-dependencies:
- dependency-name: webpack
  dependency-type: direct:development
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
 2023-06-10 23:51:23 -07:00
dependabot[bot]
0be0d07630 chore(deps): bump minimatch and serve-handler in /docs 
Bumps [minimatch](https://github.com/isaacs/minimatch) and [serve-handler](https://github.com/zeit/serve-handler). These dependencies needed to be updated together.

Updates `minimatch` from 3.0.4 to 3.1.2
- [Release notes](https://github.com/isaacs/minimatch/releases)
- [Commits](https://github.com/isaacs/minimatch/compare/v3.0.4...v3.1.2)

Updates `serve-handler` from 6.1.3 to 6.1.5
- [Release notes](https://github.com/zeit/serve-handler/releases)
- [Commits](https://github.com/zeit/serve-handler/compare/6.1.3...6.1.5)

---
updated-dependencies:
- dependency-name: minimatch
  dependency-type: indirect
- dependency-name: serve-handler
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>
 2023-06-10 23:37:26 -07:00
pixls
9d39a87f67
fix(docs): Change user-setup.md order to agree with order in setup script 
Fixes #1281 

Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
 2023-06-10 17:49:30 -07:00
kadoyau
98524a9567
fix(docs): Fix INT6 keycode description 2023-06-10 12:32:50 -07:00
Albert Y
a5c57fa224
feat(docs): Add an example for combining just modifiers (#1826) 
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
 2023-06-05 22:22:39 -07:00
Xudong Zheng
5d9ae8fffa feat(split): allow central to connect to multiple peripherals 2023-06-05 16:22:41 -06:00
Peter Johanson
f08802eaa7 fix(boards): Proper i2c pinctrl for BlueMicro840 
* Use the proper pin assignmets after the move to pinctrl for the
  Zephyr 3.2 migration.
 2023-06-05 00:05:44 -06:00
Peter Johanson
19d883cdfe fix(bluetooth): Passkey pairing improvements. 
* Capture the last 6 entered digits, and then require pressing
   Enter/Return to submit the entered digits. This matches the
   messaging shown on hosts regarding how to complete pairing.
* Fix the wording on the Kconfig menu item to accurately describe
  the feature.
 2023-06-05 00:01:44 -06:00