* Public type for HSB led color.
* New API for calculating "next" HSB based on current
state.
* Update behavior to convert the increment/decrement
commands to absolute command as well.
* Use lesser-known DT features to skip behaviors not referenced
in the user keymap
* Update the behaviors to skip code if no nodes found.
* Remove some empty config/data structs where unused in
behaviors.
Tap-and-hold a hold-tap to hold the tap behavior so it can repeat.
After a tap, if the same key is pressed within `quick_tap_ms`, the
tap behavior is always picked.
This is useful for things like `&ht LSHFT BACKSPACE` where holding
the backspace is required.
Implements #288.
this makes LS(LEFT_CONTROL) work as if shift and control were both
pressed explicitly. Previously, the left shift would have been released
as soon as another key was pressed. The implicit behavior is useful in
case of LS(NUMBER_1) when rolling over to other keys.
Also see #361.
* Make it easier to use *just* event payloads by defining the data,
and then having event manager macros generate "wrapper structs"
* Improve is_*/cast_* APIs to hide details of full event struct.
* Create `zmk_event_t` typedef to pass to event handlers.
* Bring event names inline w/ consistent `zmk_` prefix.
* If various events get dropped, we can end up with duplicate
codes in our report, so tweak to ensure we look for all matches
and clear them when we have a keycode released.
Aligns with the HID specification.
Usage page values were sometimes declared as uint8_t and sometimes uint16_t. This commit aligns all instances with the HID specification for consistency.
PR: #521
* Add uppermost, current layer status widget to oled
* Run clang format
* Fixup display widget source includes in CMakeLists
* Update layer widget to only be enabled on primary half of a split keyboard and shuffle some of the options specific to the widget to be enabled via the widget
* Update to latest lvgl/zmk/zephyr ; remove version text from oled per PR
* Fixup file names
* Remove last remenants of the version display text from the oled
* Fixup clang-format
Co-authored-by: KemoNine <mcrosson@kemonine.info>
Aligns *.h and *.c to underscore naming convention.
These were kept (with warnings) for backwards compatibility with external boards/shields:
- kscan-mock.h
- matrix-transform.h
They should be removed in the future.
PR: #523
* Fire an event w/ layer number, state, and timestamp
when a layer is activated/deactivated.
* Add `zmk_keymap_highest_layer_active()` query.
Co-authored-by: KemoNine <mcrosson@kemonine.info>
Silences the following build warning ...
../src/ble.c:407:13: warning: 'auth_passkey_display' defined but not used [-Wunused-function]
407 | static void auth_passkey_display(struct bt_conn *conn, unsigned int passkey) {
fix: clang-format and setting state variable
fix: Fix startup settings configuration
fix(ext_power): Add static to state
fix(ext_power): Set default settings value
Use driver data status instead of global file state
The application usage used by report 1 is `HID_USAGE_GD_KEYBOARD`. Moreover, the `keys` usage page (0x07) that primarily feeds into this report is predominantly keyboard codes. The rest of the system should align with this naming convention.
Key release events released keys on the wrong layer if the 'top layer'
was not &trans above the &mo key.
base <&mo 1>
layer 1 <&kp B>
This was caused by overwriting
`zmk_keymap_active_behavior_layer[position]` after the &mo key was
handled.
Added a new setting to remember the user's preferred endpoint. When both USB and
BLE are connected, the preferred endpoint will be used.
Added a new behavior to control this setting. It supports commands:
&end END_USB - Prefer USB output
&end END_BLE - Prefer BLE output
&end END_TOG - Toggle between USB and BLE
Added zmk_ble_active_profile_is_connected() to allow code outside ble.c to check
the status of the active profile, and changed the ble_active_profile_changed
event to also notify when the active profile connects or disconnects.
Changed endpoint selection to to also update when the active profile changes,
connects, or disconnects.
This prevents stuck keys when switching endpoints by clearing
everything in the HID report and sending one last report before
switching to the new endpoint.
Added some utility functions and an event for tracking the state of the
USB connection.
Updated endpoints.c to select a single endpoint to send HID reports to
based on the status of the USB and BLE connections. Partially fixes#206.
Future commits will add a user setting to control which endpoint is used if
both USB and BLE are ready.
This is necessary for testing a large number of events (e.g. every key code) within a single build/pass.
The u8_t limitation became apparent during end-to-end testing of #21.
* Add timestamps to position events and behaviors.
- Take original event timestamps into consideration so nested tap-holds have proper timing.
- Add position and timestamp to keycode state changed event so the one-shot behavior can properly identify other keypresses and timings.
- Add timestamp to position events received from peripheral
* reduce number of arguments to behaviors
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
* New ZMK_SLEEP Kconfig symbol to enable the functionality.
* Switch to PORT events that allows wake from deep sleep.
* Initial basic power management policy, with idle ms,
and ignoring deep sleep if we detect a USB connection.
* Add back in profiles, not using Zephyr
BT identity infrastructure.
* Restore additional `&bt` commands for profile
operations.
* Fix for split pairing and subscriptions, since
Zephyr persists subscriptions across connects.
* Remove keymap from peripheral builds, reduces
firmware size, and avoids unneeded attempts
to send HID data.
* Simplify the `bt` behavior to one current command
`BT_CLEAR_BONDS_CMD`.
* Simplify BLE code for split and non-split keyboards.
* Remove keymap processing from split peripheral side.
* Add `bt` behavior that can be used to perform certain actions,
such as next/prev identity, reset identity, etc.
NOTE: Multiple identities is only supported for non-split shields,
due to missing Zephyr identity functionality for dual
central/peripheral devices.
* Proper bond reset tied to action, that honors peripheral bonds,
so folks can reset and pair to other hosts, without breaking
bonds between splt halves.