Ben
41bfc56e13
feat(board): add puchi_ble_v1 to boards
...
* feat(board): Add Puchi-BLE v1 board
2022-09-05 18:15:24 -04:00
zhiayang
19cc96b86d
fix(boards): Fix battery ADC channel for Mikoto
2022-05-09 11:31:58 -04:00
Peter Johanson
41dc774848
fix(boards): Fix key position 4 flakiness w/ RGB
...
* Remove MISO pin from pinctrl for BDN9 rev2 board, to avoid
the 4th switch being set up for an alternate function, which
was causing spurious key press events to be triggered.
2022-05-05 22:58:56 -04:00
Joel Spadin
11ab52582c
refactor(battery): Auto enable battery drivers
...
CONFIG_ZMK_BATTERY_NRF_VDDH and CONFIG_ZMK_BATTERY_VOLTAGE_DIVIDER are
now automatically enabled if a DT node with the matching "compatible"
property is present and enabled, so they no longer need to be manually
set for each board.
2022-04-25 22:34:04 -04:00
Joel Spadin
6d6efa32f5
refactor(kscan): Auto enable kscan drivers
...
The key scanning drivers are now automatically enabled when a DT node
with the matching "compatible" property is present and enabled, so they
no longer need to be manually set for each board.
2022-04-25 22:28:53 -04:00
Joel Spadin
388e345c28
feat(battery)!: Add chosen node for battery
...
battery.c now uses the zmk,battery chosen node to select a battery
sensor. Using the node labeled "BATTERY" is maintained for backwards
compatibility but is now deprecated. Custom boards should switch to
using the chosen node.
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
# app/boards/arm/nice60/nice60.dts
# app/boards/arm/nrfmicro/nrfmicro_13.dts
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
2022-04-17 11:30:57 -04:00
Peter Johanson
22c487f276
feat(boards): Add BDN9 rev2 RGB support
2022-04-09 21:57:22 -04:00
Peter Johanson
97e62f2da5
feat(boards): Add Seeed(uino) XIAO interconnect
...
* Document the Seeed(uino) XIAO interconnect
* Add metadata files for two upstream boards, XIAO and XIAO BLE.
* Add conf and overlay files to properly configure the boards
for ZMK use.
2022-04-03 00:10:29 -04:00
Peter Johanson
4eb8f8cd23
refactor(boards): Use Zephyr UF2 generation.
2022-04-03 00:10:29 -04:00
Peter Johanson
cc51562f78
fix(boards): Move ARM clock config to DTS.
2022-04-03 00:10:29 -04:00
Peter Johanson
ded79ba422
fix: Remove deprecated pinmux code.
2022-04-03 00:10:29 -04:00
Peter Johanson
bf2fc68070
fix(underglow): Add newly required color-mapping prop.
2022-04-03 00:10:29 -04:00
Peter Johanson
c5ab8a9444
refactor: Move the DT based CDC ACM setup.
2022-04-03 00:10:29 -04:00
Peter Johanson
6287819fcc
refactor: Move to USB_DEVICE_STACK symbol.
...
See: https://docs.zephyrproject.org/latest/releases/release-notes-2.7.html#changes-in-this-release
2022-04-03 00:10:29 -04:00
Peter Johanson
35e73d40f5
fix(boards): Enable direct polling for BDN9.
...
* BDN9 Rev2 requires direct polling,
interrupts don't work as expected.
2022-03-24 03:51:08 +00:00
Krzysztof Gutkowski
459972fddd
fix(boards): Adjust matrix for BT60v1 to fix the broken right Shift key
...
according to the diagram from the board creators, it should be RC(3,12)
instead of RC(3,13)
2022-03-14 13:01:54 -05:00
David Fiander
970e63bec6
fix(boards): Properly use dfu-util to flash DZ60
2022-01-12 21:36:08 -05:00
zhiayang
d29236141e
fix(boards): Proper active high and init delay for Mikoto ext-power
2022-01-11 16:07:30 -05:00
Midge 't Hoen
e0620f1a2d
Bump init delay to 50ms for nico-nano
2022-01-03 14:39:42 -06:00
Kyle McCreery
a8c7cf4f19
feat(boards): Add S40NC board definition ( #1021 )
...
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* Initial commit with settings updated to match schematic.
* Removing test directories.
* removed naked60 config files
* Fixed dogbone definitions to be full working for murphpad.
* Preparing S40NC for PR
* Removed the murphpad test files that were not supposed to be a part of this PR.
* Changing licensing to be from The ZMK Contributors.
* Changed the licensing in the keymap file to be from The ZMK Contributors
* Update s40nc.keymap
2021-12-02 17:21:35 -06:00
ReFil
b877410379
fix(boards): BT60 Formatting tweaks
2021-11-30 15:33:12 -06:00
ReFil
99c5a8ee6f
feat(boards): Add BT60 Boards
2021-11-30 15:33:12 -06:00
Hai-Ninh Dang
f2e0642291
feat(boards): Add Mikoto board
...
* Supports selecting from several possible charge currents
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
2021-11-09 00:57:24 -05:00
Nick Winans
4a03214e06
feat(boards): Add D18-21 to Pro Micro pin mappings
2021-09-25 23:09:21 -04:00
Peter Johanson
e42590a049
feat(board): Add Ferris 0.2 boards
...
* Onboard stm32f072 with mcp23018 IO expander.
* No underglow support yet.
* Miryoku inspired default layout.
2021-09-14 20:48:28 -04:00
Peter Johanson
39eb80562d
feat(metadata): Add MakerDiary nRF52840 M.2 interconnect
...
* Add interconnect details.
* Add m60 and nrf52840_m2 metadata files.
2021-09-11 00:50:36 -04:00
Peter Johanson
0c3f1309c6
refactor(boards): Add metadata for boards.
...
* Standalone and pro-micro format board metadata added.
2021-09-11 00:50:36 -04:00
Peter Johanson
b52835ffbf
feat: Add a few sample hardware metadata files.
2021-09-11 00:50:36 -04:00
Martin Aumüller
08078210da
fix: Planck rev 6.1
...
My Planck rev 6.1 would not register any keys without "col2row".
I also had to apply a matrix_transform in order to move them to the
correct position. Peeking into #228 helped for finding this.
I also add transforms for the 2u spacebar layouts.
2021-08-24 21:21:18 -04:00
Nick Winans
cf5c56c4f1
feat(boards): Use the nRF VDDH driver for the nice!nano v2
2021-08-02 21:56:53 -04:00
Peter Johanson
b2d64fe598
refactor(boards): Switch proton_c to newer pinmux approach.
...
See: https://github.com/zephyrproject-rtos/zephyr/issues/28999
PR: https://github.com/zmkfirmware/zmk/pull/736
2021-07-17 17:04:25 -04:00
Pete Johanson
d7475f792f
fix(boards): Enable pinmux for bdn9_rev2 by default.
...
See: https://github.com/zephyrproject-rtos/zephyr/issues/28999
PR: https://github.com/zmkfirmware/zmk/pull/736
2021-07-17 17:04:25 -04:00
Nick Winans
edb3ff1bb1
feat(boards): Add nice!nano v2
2021-07-15 18:52:28 -04:00
Nick Winans
efcc49f23d
fix(boards): Set nice!60 nRF subfamily for openocd ( #816 )
2021-06-04 00:33:44 -04:00
Anthony Amanse
719b6aa0ae
fix(boards): Add delay on initializing external power for BlueMicro840
...
This commits adds a delay of 20ms on initializing the external
power control driver. Previously, OLED's i2c driver is failing to
initialize the display. This commit fixes that issue.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
2021-05-31 00:44:30 -04:00
Anthony Amanse
cdbfb35662
fix(boards): Fix Blue LED pin definition in BlueMicro840
...
This commit fixes the pin definition for BlueMicro840. Based on the
schematics, the blue led is at pin 1.10.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
2021-05-31 00:20:46 -04:00
Nick Winans
3f838f0aaf
feat(boards): Add nice!60 board
2021-05-30 11:47:20 -04:00
Lucas Messenger
d8119cd663
fix(boards): Proper BlueMicro840_V1 &pro_micro_a map for A10 ( #733 )
2021-03-24 13:21:40 -04:00
Pete Johanson
969e5568af
fix(boards): Define but don't enable uart0.
...
* Set pro-micro TX/RX pins, but don't enable the UART
by default.
2021-01-15 01:51:44 -05:00
innovaker
f17584ca0e
chore: standardize # style headers
...
Changes made with regex plus some manual tweaks.
Find:
/(?:(?<!#!\/bin\/sh\n)(?:^#\n))*^#.*?[Cc]opyright.*?(\d{4}) *([0-9A-z,_\- ]+).*?\n(?:^#\n)*^#.*?SPDX-License-Identifier:? *(.+) *?\n(?:^#\n)*/gm
Replace:
# Copyright (c) $1 $2
# SPDX-License-Identifier: $3
PR: #564
2021-01-06 17:00:44 -05:00
innovaker
5a72662898
chore: standardize C style headers
...
Changes made with regex plus some manual tweaks.
Find:
/^\/\*.*\n(?:^\*.*\n)*^.*\*.*?[Cc]opyright.*?(\d{4}) *([0-9A-z,_\- ]+).*?\n(?:^.*\*.*\n)*^.*\*.*?SPDX-License-Identifier:? *(.+) *?\n(?:^.*\*.*\n)*.*\*\//gm
Replace:
/*
* Copyright (c) $1 $2
*
* SPDX-License-Identifier: $3
*/
PR: #565
2021-01-01 23:06:41 -05:00
Pete Johanson
39490552f2
feat(boards): Add BDN9 Rev2 board.
...
* Onboard stm32f072.
* 3 possible encoder positions.
* Underglow/per-key not yet support.
2020-12-31 14:46:15 -05:00
innovaker
842aa5a842
refactor: replace filename hyphens with underscores
...
Aligns *.h and *.c to underscore naming convention.
These were kept (with warnings) for backwards compatibility with external boards/shields:
- kscan-mock.h
- matrix-transform.h
They should be removed in the future.
PR: #523
2020-12-28 01:15:35 -05:00
innovaker
00ca0d2f1c
refactor(app): replace struct device *
with const struct device *
...
Replaced with RegExp: /(?<!const )(struct device \*)/g
See: https://docs.zephyrproject.org/latest/releases/release-notes-2.4.html
PR: #467
2020-12-14 12:41:25 -05:00
Joel Spadin
77c16b020e
improvement: upgrade default keymaps
...
Ran all the default keymaps through the keymap upgrader and manually adjusted
alignment.
2020-12-10 12:05:21 +00:00
Nick
91e3a7d75a
boards: Cleanup and standardize features
2020-11-10 23:14:38 -05:00
Nick
82a5736d08
fix(boards): Remap flash to account for bootloader
2020-11-02 23:07:23 -05:00
Nick
74fa113d88
fix(boards): Rename BVD labels
2020-11-01 23:00:54 -05:00
Nick
a008731103
Implement Kconfig and enhance error checks
2020-10-26 16:01:57 -05:00
Nick
adb07926b1
Remove newlib dep
2020-10-24 18:52:34 -05:00
Nick
8efcd80f3a
Add missing ADC and fix formatting
2020-10-23 00:57:32 -05:00
Nick Winans
70ffcca3b4
Merge branch 'main' into bluetooth/battery-reporting
2020-10-23 00:55:50 -05:00
Nick
162c6b77db
clang-format and add missing defconfig values
2020-10-23 00:50:39 -05:00
Nick
3082455aec
Refactor driver to use Sensor API
2020-10-23 00:45:59 -05:00
Mega Mind
4d81b10ba7
Added driver to control the external power output
...
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
2020-10-10 08:11:46 +08:00
Pete Johanson
12b9a37005
Merge pull request #211 from petejohanson/core/keymap-port-event-exploration
...
Use PORT events for kscan matrix interrupts, add option for deep sleep.
2020-10-06 17:32:35 -04:00
Mega Mind
b8cb5f939a
M60 keymap update and misc changes
...
* Updated M60 keymap
* Make nrfjproj as default runner
* Remove the polling config
2020-10-05 21:24:39 +08:00
Mega Mind
c54decd144
Added Makerdiary M.2 module
2020-10-05 21:23:38 +08:00
Pete Johanson
9be566603e
feat(kscan): Use PORT events for kscan matrix interrupts
...
* Lower power usage compared to regular interrupts on nrf52.
2020-10-04 22:03:21 -04:00
Jason Chestnut
cca8337f05
Add support to GPIO matrix driver for matrix polling, rather than interrupt-based IO.
...
- Add ZMK_KSCAN_MATRIX_POLLING config flag to Kconfig
- Update matrix driver code to use the above flag to conditionally add the handling code for polling operations.
2020-09-25 11:49:07 -04:00
Pete Johanson
90bfe6026d
fix(boards): Flash Planck with dfu-util
.
2020-09-21 09:49:56 -04:00
Nick
da0fb965f6
Merge remote-tracking branch 'upstream/main' into bluetooth/battery-reporting
2020-09-19 19:15:05 -05:00
Nick
844f2c7674
Voltage divider driver initial implementation
2020-09-19 19:14:59 -05:00
Pete Johanson
191a2d755a
chore: clang-format the codebase.
...
* Use the LLVM style
* Override indent width (8) and column limit (100)
* Fixes #142 .
2020-09-14 00:10:34 -04:00
Pete Johanson
68e72f9275
fix: Switch to single AUTHORS file.* Closes #164
2020-09-10 10:24:23 -04:00
Nick
ceda57ddfd
Fix comment name of keyboard
2020-09-07 12:32:25 -05:00
Nick
e845995c2d
Fix Planck defconfig
2020-09-07 12:25:11 -05:00
Nick
6b433fdefd
Finish DZ60RGB board definition
2020-09-07 12:24:47 -05:00
Nick
fa40558f73
Merge commit '61b249666b13f7f356c0e77ee5eb500d672d7dce' into boards/dz60rgb
2020-09-07 12:22:18 -05:00
Mega Mind
bc023baa7d
Incorporate comments - Change config name to nrfmicro specific
2020-08-23 12:59:39 +08:00
Mega Mind
7aea57328c
Add KConfig for board battery charger
2020-08-21 03:12:06 +08:00
Mega Mind
4efce4223a
Use correct macro for board
2020-08-20 18:59:41 +08:00
Pete Johanson
506c3b031e
refactor(boards): Rename to bluemicro840_v1.
2020-08-19 16:35:18 -04:00
Pete Johanson
2a0e35c11f
Merge pull request #101 from okke-formsma/nrfmicro
...
nrfmicro support
2020-08-19 16:05:51 -04:00
Okke Formsma
93b1e0ac44
Add nrfmicro 1.1, 1.1 flipped and 1.3 boards.
2020-08-19 21:02:21 +02:00
Nick
cab34d835f
fix(board): Fix status LED on BlueMicro
2020-08-18 23:28:34 -05:00
Nick
674c230dbb
fix(board): Cleanup nice!nano DT
2020-08-18 23:28:06 -05:00
Pete Johanson
59f85c93cd
fix(boards): Remove dup uart0
overrides for nano
2020-08-18 16:33:24 -04:00
Pete Johanson
3f1dfbaad1
Merge pull request #91 from Na-Cly/boards/bluemicro52840_v1
...
Add bluemicro support
2020-08-16 22:32:04 -04:00
Pete Johanson
8b4d2b6093
Add DCDC mode config.
2020-08-16 21:33:01 -04:00
Pete Johanson
abe40f8ef5
Various fixes.
2020-08-16 21:30:45 -04:00
Pete Johanson
47b219cca5
Remove duplicate uart0 node.
2020-08-16 21:27:37 -04:00
Derek
6ef2102af9
Update board.cmake
2020-08-16 08:48:34 -04:00
Derek
75f4adb101
Update arduino_pro_micro_pins.dtsi
2020-08-16 08:46:16 -04:00
Derek
dd165c6829
Corrected pins for scl-pin and sda-pin
2020-08-15 15:53:31 -04:00
Derek
9dd8217cd4
Add bluemicro support
2020-08-15 15:32:36 -04:00
Pete Johanson
4acfa8d7ef
Add DCDC setting for nano.
2020-08-14 23:26:03 -04:00
Pete Johanson
78059bbbdb
Fix up some incorrect license headers.
2020-08-11 14:49:43 -04:00
Pete Johanson
0460631729
Refactor to simpler keymaps.
2020-08-06 23:28:34 -04:00
Pete Johanson
f83ec5ce2b
Refactor to using .keymap files
...
* Still just devicetree keymaps.
* Filename can now use `<board>.keymap` or
`<shield>.keymap` convention, including
overrides for revisions, etc.
2020-08-06 10:32:06 -04:00
Nick
bc282a0a4f
WIP DZ60RGB board definition
2020-08-02 10:29:07 -05:00
Nick
bb09707bd2
Add base files and configuration for RGB underglow
2020-07-24 01:06:56 -05:00
Pete Johanson
6701b7babc
Working BT settings.
2020-07-17 22:43:40 -04:00
Pete Johanson
33d4341320
Code partition size fix for nice!nano.
2020-07-15 23:27:15 -04:00
Pete Johanson
c45dbe3c8f
boards: nice_nano: Fix i2c usage.
...
* change conflicting pins usage for uart.
* use i2c0 properly instead.
2020-07-11 13:09:18 -04:00
Pete Johanson
6cafa9556c
nice!nano fixes for necessary USB CDC ACM UART console.
2020-07-07 10:49:51 -04:00
Pete Johanson
9bee640ae3
More Planck rev6 fixes.
2020-07-06 10:19:44 -04:00
Pete Johanson
a9b949cd94
Fixes for WIP planck board definition.
2020-07-06 00:43:03 -04:00
Pete Johanson
f8010d046f
Add missing semicolon to pro micro nexus.
2020-06-26 11:23:31 -04:00
Pete Johanson
559670b818
Missed removing some preceding 0 padding.
2020-06-26 11:07:42 -04:00