zmk/app/boards/shields/knob_goblin/knob_goblin.overlay
Peter Johanson fff1cbecdc fix: Add wakeup-source; to kscan nodes for ZMK_SLEEP.
* ZMK_SLEEP also enables PM_DEVICE, so be sure to mark kscan
  nodes as wakeup sources so they can wake keyboards from sleep.
2024-03-29 12:31:43 -07:00

81 lines
2.0 KiB
Plaintext

/*
* Copyright (c) 2022 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <dt-bindings/zmk/matrix_transform.h>
/ {
chosen {
zephyr,display = &oled;
zmk,kscan = &kscan0;
};
kscan0: kscan {
compatible = "zmk,kscan-gpio-matrix";
wakeup-source;
diode-direction = "col2row";
row-gpios
= <&pro_micro 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 16 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
col-gpios
= <&pro_micro 9 GPIO_ACTIVE_HIGH>
, <&pro_micro 8 GPIO_ACTIVE_HIGH>
, <&pro_micro 7 GPIO_ACTIVE_HIGH>
, <&pro_micro 6 GPIO_ACTIVE_HIGH>
, <&pro_micro 5 GPIO_ACTIVE_HIGH>
;
};
top_encoder: encoder_top {
compatible = "alps,ec11";
a-gpios = <&pro_micro 19 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 18 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
steps = <80>;
status = "okay";
};
bottom_encoder: encoder_bottom {
compatible = "alps,ec11";
a-gpios = <&pro_micro 20 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 21 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
steps = <80>;
status = "okay";
};
sensors: sensors {
compatible = "zmk,keymap-sensors";
sensors = <&top_encoder &bottom_encoder>;
triggers-per-rotation = <20>;
};
};
&pro_micro_i2c {
status = "okay";
oled: ssd1306@3c {
compatible = "solomon,ssd1306fb";
reg = <0x3c>;
width = <128>;
height = <32>;
segment-offset = <0>;
page-offset = <0>;
display-offset = <0>;
multiplex-ratio = <31>;
segment-remap;
com-invdir;
com-sequential;
inversion-on;
prechargep = <0x22>;
};
};