zmk/app/boards/shields/leeloo/leeloo.keymap
Joel Spadin d4e8dee444 refactor(keymaps): Rename layer label to "display-name"
Changed the property used to define a layer name for displays from
"label" (which affects other things in Zephyr and is deprecated) to
"display-name". (It cannot be named simply "name", because that has
special meaning in newer versions of the devicetree compiler.)

"label" is still supported as a fallback, so no changes need to be made
to existing keymaps.
2023-12-04 20:06:54 -06:00

67 lines
3.3 KiB
Plaintext

/*
* Copyright (c) 2023 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
#include <behaviors.dtsi>
#include <dt-bindings/zmk/outputs.h>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
/*
* Assign the cs-gpios pin to 4.
* Uncomment these next few lines if implementing nice!view Displays
* A wire from the nice!view CS display needs to be connected to the
* High Frequency P0.22, also known as D4 if you choose to refer to
* the pins with Arduino Labels.
*/
//nice_view_spi: &spi0 {
// cs-gpios = <&pro_micro 4 GPIO_ACTIVE_HIGH>;
//};
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
display-name = " QWERTY";
bindings = <
&kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0 &kp BSLH
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp GRAV
&kp CAPS &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp LGUI &kp LGUI &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RSHFT
&kp LALT &kp LCTRL &lt 1 RET &lt 2 MINUS &lt 2 EQUAL &lt 1 SPACE &kp BSPC &kp DEL
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
lower_layer {
display-name = " Lower";
bindings = <
&trans &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11
&trans &trans &trans &trans &trans &trans &kp PG_UP &kp HOME &kp UP &kp END &trans &kp F12
&trans &trans &trans &trans &trans &trans &kp PG_DN &kp LEFT &kp DOWN &kp RIGHT &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
raise_layer {
display-name = " Raise";
bindings = <
&trans &trans &trans &trans &trans &trans &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &sys_reset &bootloader
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &bt BT_CLR &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
};
};