History

Hooky 9dcc3ac375 fix(shields): Fixup nice!view adapter pinctrl props. `pinctrl-0` setting missing `<>`.		2023-04-07 06:53:10 -07:00
..
boards	fix(shields): Fixup nice!view adapter pinctrl props.	2023-04-07 06:53:10 -07:00
Kconfig.defconfig	feature(shields): Add nice!view	2022-09-29 21:11:26 -04:00
Kconfig.shield	feature(shields): Add nice!view	2022-09-29 21:11:26 -04:00
nice_view_adapter.conf	feature(shields): Add nice!view	2022-09-29 21:11:26 -04:00
nice_view_adapter.overlay	feature(shields): Add nice!view	2022-09-29 21:11:26 -04:00
nice_view_adapter.zmk.yml	feature(shields): Add nice!view	2022-09-29 21:11:26 -04:00
README.md	feature(shields): Add nice!view	2022-09-29 21:11:26 -04:00

README.md

nice!view Adapter

This shield is used as an adapter between the nice!view and existing shields/boards that expose an I2C OLED header.

To use this shield, you should add this shield to your list of shields before nice_view.

The nice!view will use the SDA/SCL pins of the OLED, and then the adapter expects a final pin to be "bodged" from your microcontroller to the nice!view CS pin. This adapter assumes that the CS pin bodged is the &pro_micro 1 pin or "D1", which is the top left pin when looking at the front of the board. If you can't use this pin, you'll need to override the cs-gpios for the &nice_view_spi bus (in your zmk-config keymap for example) or you will want to define your own &nice_view_spi bus without using this adapter.

west build -b nice_nano_v2 -- -DSHIELD="lily58_left nice_view_adapter nice_view"