0bf72e4fe5
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
36 lines
2.2 KiB
Markdown
36 lines
2.2 KiB
Markdown
# Jabberwocky Gen. 2
|
|
|
|
|
|
|
|
A full-size, columnar-staggered, Alice-style keyboard. Specifically, this firmware is for the second generation (v2) of Jabberwocky PCBs, all of which use the same MCU (Atmega 32u4) and firmware.
|
|
|
|
| PCB Variant | Numpad Side | Daughterboard | Soldered / Hotswap | In-switch LEDs |
|
|
| ------------- | ----------------- | ------------- | ------------------------- | --------------------- |
|
|
| Blue | Left (Sinister) | Elite C | Soldered (SMD DIY kit) | Caps & Num Indicators |
|
|
| Red | Right (Dexterous) | Elite C | Soldered (SMD DIY kit) | Caps & Num Indicators |
|
|
| Green\* | Left (Sinister) | Unified DB | Soldered (switches only) | Backlit + Indicators |
|
|
| Yellow | Right (Dexterous) | Unified DB | Soldered (switches only) | Backlit + Indicators |
|
|
| Black\* | Left (Sinister) | Unified DB | Hotswap Hybrid | None |
|
|
| White | Right (Dexterous) | Unified DB | Hotswap Hybrid | None |
|
|
|
|
\* *Only the Green and Black PCBs will be compatible with the upcoming Sinister Jabberwocky CNC case.*
|
|
|
|
|
|
For more information, join the [NoPunIn10Key Discord](https://discord.gg/sku2Y6w).
|
|
|
|
- Keyboard Maintainer: [Alex Ronke](https://nopunin10did.com/), also known as [NoPunIn10Did](https://github.com/NoPunIn10Did)
|
|
- Hardware Supported: Jabberwocky 2nd Generation PCBs
|
|
- Hardware Availability: Currently by request only
|
|
|
|
To reset the board into bootloader mode, do one of the following:
|
|
|
|
- If loaded with the default layout, use Function-Escape or Function-R *(the function buttons are the 1u keys next to B and N)*
|
|
- If using the Blue or Red PCBs, use the onboard Reset button on your Elite C
|
|
- If using any of the other PCBs, use the onboard Reset button on the PCB itself
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make nopunin10did/jabberwocky/v2:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|