tgrosinger/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
framework-16-tgrosinger
qmk_firmware/keyboards/sawnsprojects/vcl65/readme.md
Joel Challis d2accb48e7
RESET -> QK_BOOT keyboard readme (#18110)
2022-08-20 11:34:17 +01:00

1.4 KiB
Raw Permalink Blame History

VCL65 solder

A 65% keyboard sold in several variants.

  1. Solder: 06/2021. Atmega32u4 soldered keyboard. Sold under the name "VCL65" with Lotus 65 lite keyboard case. Compatible with some 65% traymount case, VCL65 and Lotus65.

Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other. Please use the .hex or .bin appropriate for your board.

  • Keyboard Maintainer: SawnsProjects & Hoaq
  • Hardware Supported: Lotus65 lite, VCL65, 65% traymount case
  • Hardware Availability: Private Discord GB

Make examples for this keyboard (after setting up your build environment):

make sawnsprojects/vcl65/solder:default

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.