tgrosinger/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
framework-16-tgrosinger
qmk_firmware/keyboards/tweetydabird/lotus58/readme.md
Markus Knutsson 28c11ed348
Lotus58 glow (#20386) 
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com>
2023-04-15 19:34:09 +01:00

1.8 KiB
Raw Permalink Blame History

Lotus 58 Glow

lotus58

  • Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement.

  • Keyboard Maintainer: TweetyDaBird

  • Hardware Supported: Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible

  • Hardware Availability: Lectronz Store

  • Hardware Design: GitHub

This keyboard firmware contains three different versions, all for the same PCB/hardware, but depending on your choice of controller/bootloader.

  • promicro - This uses the default Caterina bootloader.
  • elite_c - This uses the Atmel-DFU bootloader.
  • nanoBoot - A tiny 512 byte bootloader giving far more usable memory for features (can be used on both Elite C and Pro Micro).

Make example for this keyboard (after setting up your build environment):

make tweetydabird/lotus58/promicro:default

Flashing example for this keyboard:

make tweetydabird/lotus58/elite_c:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top outer key for each hand as it is plugged in
  • Physical reset: Briefly short the marked pads on PCB
  • Keycode in layout: Press the key mapped to QK_BOOT if mapped (not in default keymap)