Winkeyless B87 Community Layout Support (#20884 )

* add matrix_diagram.md

* info.json: apply friendly formatting

* add LAYOUT_tkl_ansi_split_bs_rshift

* add LAYOUT_tkl_ansi

* add LAYOUT_tkl_ansi_tsangan_split_bs_rshift

* add LAYOUT_tkl_ansi_tsangan

* add LAYOUT_tkl_ansi_wkl_split_bs_rshift

* add LAYOUT_tkl_ansi_wkl

* add LAYOUT_tkl_iso_split_bs_rshift

* add LAYOUT_tkl_iso

* add LAYOUT_tkl_iso_tsangan_split_bs_rshift

* add LAYOUT_tkl_iso_tsangan

* add LAYOUT_tkl_iso_wkl_split_bs_rshift

* add LAYOUT_tkl_iso_wkl

* enable Community Layout support

* readme.md: update Hardware Availability link

2023-05-12 17:43:10 -07:00

1.1 KiB

Raw Permalink Blame History

B87

A TKL keyboard with RGB underglow.

QMK Firmware is not the official firmware for the B.mini.

Keyboard Maintainer: QMK Community
Hardware Supported: B87 PCB
Hardware Availability: Winkeyless.kr (no longer available)

Make example for this keyboard (after setting up your build environment):

make winkeyless/b87:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make winkeyless/b87:default:flash

This firmware can also be flashed onto the KBDFans KBD75 Round 1 Bootmapper Client boards sold during the 2017 and early 2018 timeframe.

Reset Key: Hold down the top left most key located at K00, commonly programmed as Escape while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

1.1 KiB Raw Permalink Blame History

B87

1.1 KiB

Raw Permalink Blame History