qmk_firmware/keyboards/planck/keymaps/gunp/readme.md
Gun Pinyo 0399271a73
[Keymap] update gunp layout for Planck (#12926)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-05-26 20:48:14 -07:00

79 lines
6.4 KiB
Markdown

![Cheat sheet of gunp layout for Planck keyboards](https://drive.google.com/uc?export=view&id=1INtnZhzoHpPkZ2kueP1K0Dpr6T1spr4m)
# gunp layout for Planck keyboards
* Layout Maintainer: [Gun Pinyo](https://github.com/gunpinyo)
This is my personal layout for Planck keyboards. Almost all of important
information is already in the picture of the cheat sheet above. There is also a
text-version of this cheat sheet at the end of this readme file. If both of them
are not the same, then please trust the text-version more because the picture is
just a screenshot of the text.
The base layer is `LY-0000`. Next, we custom keycodes called `FuncA`, `FuncB`,
`FuncC`, and `FuncD` (`FuncX` for short) which will switch to layout `LY-ABCD`
depending on the binary state of each `FuncX` where the corresponded binary
digit is a boolean "keycode `FuncX` is currently being pressed". This mechanism
allows us to access up to 16 different layers, however, only some of them have
been used. A layer matches regex `LY-....` is currently used if and only if the
cheat sheet mentions it.
Once each of these non-based layers activates (by a combination of `FuncX`
keycodes):
- the left-half (rows 0-3, columns 0-5) will switch according to its
individual keymap on cheat sheet,
- the right-half (rows 0-3, columns 6-11) will switch to the `RIGHT-HALF`
keymap such that keycodes that matches the regex `(L....|Thai[ABC])` are
disabled and (partially) being replaced by `FuncX` keycodes on the same
position of the base layer and keycodes in binary numbers there are
disabled.
Another keycode in the base layer is `Stick`. When it is press, the rules of
keyboard change into persistent mode. Here, the right-half is exactly the
`RIGHT-HALF` keymap in the cheat sheet. Keycodes in left-half are all no-op
initially and can be changed to other layers by tapping on the corresponded
keycodes `(L....|Thai[ABC])`. To switch back to the normal rules governed by
`FuncX` press a `Relax` keycode.
Remark:
- Layers `LY-Thai[ABC]` are only accessible via persistent mode.
- This layout doesn't employ any transparent keycode, therefore, empty
keycodes (including dummy keycodes `XXX`) are all no-op.
- Prefixes `S-`, `C-`, `A-`, and `G-` are combinators for `sft-🠜`, `ctl-🠜`,
`alt-🠜`, and `gui-🠜`, respectively.
- All keycodes that starts with a capital letter are custom keycodes. Except
single letters which stand for their alphabet.
- There is a conflict with dynamic macro (QMK's feature) with my layer
switching mechanisms, so I disable it but keep its keycodes there for later
implementation.
```
{H| "LY-0000": base-layer -- "`[🠝]` here becomes `FuncD` in other layers" |H} {H| "RIGHT-HALF": "when `Stick` is on" |H}
{8| pgup| Q | W | F | P | G | J | L | U | Y | K | tab |8} {8| L0110| [🠜] |bkspc| [🠞] | XXX | XXX |8}
{8| pgdn| A | R | S | T | D | H | N | E | I | O |Stick|8} {8| L1111|ThaiA|ThaiB|ThaiC| XXX | XXX |8}
{8|sft-🠜| Z | X | C | V | B | M |FuncA|FuncB|FuncC| [🠝] |sft-🠞|8} {8| L0100|L1000|L1010|L0010|Relax|sft-🠞 |8}
{8|ctl-🠜|alt-🠜|gui-🠜| esc |bkspc|enter|FuncD|space|print| [🠜] | [🠟] | [🠞] |8} {8| Relax|space|enter|gui-🠞|alt-🠞|ctl-🠞 |8}
{H| "LY-0100": "col0 as no-op" |H} {H| "LY-1101" -- "Email: gunpinyo@gmail.com" |H} {x| "LY-0110" -- "gunpinyo" |x}
{8| C-G home [🠝] end C-[🠝] |8} {8| Sandbox XXX AudTog KeyLock RgbTog QmkReset |8} {✜| S-f7 S-f8 f7 f8 f9 S-f9 |✜}
{8| pgup [🠜] [🠟] [🠞] C-[🠟] |8} {8| wake caplock MyName Email RgbMod QmkDebug |8} {✜| S-f4 S-f5 f4 f5 f6 S-f6 |✜}
{8| pgdn C-S C-A C-Z SC-Z |8} {8| sleep numlock DmRec1 DmPlay1 XXX QmkEepRst |8} {✜| S-f1 S-f2 f1 f2 f3 S-f3 |✜}
{8| C-[🠜] C-F C-[🠞] |8} {8| power scrlock DmRec2 DmPlay2 DmStop insert |8} {✜|S-f10 S-f11 f10f11f12 S-f12|✜}
{8| "LY-1000" |8} {8| "LY-1010" |8} {8| "LY-0010" |8} {H| "LY-1111" - "powered by QMK firmware" |H}
{H| % ? ! ` |H} {H| # 7 8 9 |H} {H| & | ~ ^ |H} {8| msAC1 msAC0 scr-🠜 mov-🠝 scr-🠞 scr-🠝 |8}
{H| @ , . ' = |H} {H| * 4 5 6 + |H} {H| { [ ( < / |H} {8| msAC2 XXX mov-🠜 mov-🠟 mov-🠞 scr-🠟 |8}
{H| $ ; : \" _ |H} {H| 0 1 2 3 - |H} {H| } ] ) > \ |H} {8| mPrev btn-🠝 mRWD mPlay mFFD btn-✜ |8}
{8| mNext btn-🠟 pause mStop btn-🠜 btn-🠞 |8}
1. evdev pc105 (US: qwerty, TH: kedmanee) 5. "LY-1110" is `G-`+"LY-0110"
2. `G-space` is used to switch XKB layout 6. "LY-1100" is `S-`+"LY-0100" except [C-S, C-A, C-Z, SC-Z, C-F] which become
3. when `Stick` is off, layer switchers other than `FuncX` are disabled [C-X, C-C, C-V, C-L, C-R] respectively
4. ["LY-1000", "LY-1010", "LY-0010"] omit col0 and row3, but they have all `mod-🠜` from the base-layer, the rest are no-op
{H| "LY-0001" -- "`mod#🠜` is oneshot-mod" |H} {8| "LY-ThaiA" |8} {8| "LY-ThaiB" |8} {8| "LY-ThaiC" |8}
{8| C-H C-0 SC-pgup bri-🠝 SC-pgdn vol-🠝 |8} {H| ฌ ‍‍‍ฅ ‍ค ม ฤ ฦ |H} {H| ์ ‍‍‍‍‍็ ่ ้ ๊ ๋ |H} {H| ภ ‍‍ฃ ‍ข ฮ ‍‍‍ฎ ‍‍ฏ |H}
{8| SC-T C-[+] C-pgup bri-🠟 C-pgdn vol-🠟 |8} {H| ณ ‍ว ‍‍‍‍‍ง ‍น ‍‍ร ‍ล |H} {H| โ ‍แ ‍‍‍‍‍‍‍‍‍‍‍เ ‍‍‍‍‍‍‍‍‍‍‍‍‍า ‍‍‍‍‍‍‍‍‍‍‍‍‍ั ‍‍‍‍‍‍‍‍ะ |H} {H| ถ ‍‍‍‍จ ‍‍‍ก อ ‍‍‍ด ‍‍ต |H}
{8| sft#🠜 C-[-] A-[🠜] C-T A-[🠞] vol-✜ |8} {H| ญ ‍‍ธ ‍‍‍ท ย ช‍‍‍‍‍‍‍‍‍‍‍‍‍ซ |H} {H| ใ ‍‍‍ไ ‍‍‍‍‍‍‍‍‍‍‍‍ิ ‍‍‍‍‍‍ี ‍‍‍‍‍‍‍‍‍‍‍ึ ‍‍‍‍‍ื |H} {H| ศ ‍ษ ‍‍ส ห ‍บ ป |H}
{8| ctl#🠜 alt#🠜 gui#🠜 C-W delete menu |8} {H| ฒ ฆ ฑ ‍‍‍‍‍‍‍‍‍‍ฬ พ‍‍‍‍‍‍‍‍‍‍‍ฟ |H} {H| ‍‍‍‍ๅ ‍‍‍‍‍‍‍ฺ ํ ำ ุ ‍‍‍‍‍‍‍‍‍‍ู |H} {H| ฯ ‍‍ๆ ‍‍‍‍ฐ ฉ ‍‍‍ผ ‍ฝ |H}
```