qmk_firmware/keyboards/0xcb/tutelpad/readme.md
Sam 16c91e0cf2
[Keyboard] Added TutelPad keyboard (#16975)
* TutelPad firmware v1.0

* Added VIA compatibility

* Update keyboards/0xcb/tutelpad/config.h

* Update keyboards/0xcb/tutelpad/keymaps/via/keymap.c

* Update keyboards/0xcb/tutelpad/keymaps/via/keymap.c

* Update keyboards/0xcb/tutelpad/keymaps/via/keymap.c

* Add new OLED image, implement suggested fixes

* Update keyboards/0xcb/tutelpad/rules.mk

* Update keyboards/0xcb/tutelpad/rules.mk
2022-07-14 19:52:39 -07:00

20 lines
870 B
Markdown

# TutelPad macropad
* Keyboard Maintainer: [ItsFiremanSam](https://github.com/ItsFiremanSam)
* Hardware Supported: [TutelPad GitHub](https://github.com/0xCB-dev/0xCB-TutelPad)
* Hardware Availability: [KeebSupply](https://keeb.supply/)
## Bootloader
You can enter the bootloader by pressing the reset switch on the side while the keyboard is plugged in. You can also short the GND and RST pads on the controller.
Make example for this keyboard (after setting up your build environment):
make 0xcb/tutelpad:default
Flashing example for this keyboard:
make 0xcb/tutelpad:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).