qmk_firmware/keyboards/handwired/elrgo_s/readme.md
Yaroslav Smirnov c592128219
[Keyboard] Add Elrgo S to keyboards/handwired (#13893)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-08-19 11:15:30 -07:00

29 lines
1.1 KiB
Markdown

# Elrgo S Split Keyboard
This is a fork of the VOID Ergo S with QMK Configurator support.
Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.
[Building guide, models for 3D printing](https://github.com/Eloren1/Elrgo_S)
* Keyboard Maintainer: [Eloren](https://github.com/Eloren1)
* Hardware Supported: Arduino Pro Micro
* Hardware Availability: [Open Source](https://github.com/Eloren1/Elrgo_S)
Make example for this keyboard (after setting up your build environment):
make handwired/elrgo_s:default
Flashing example for this keyboard:
make handwired/elrgo_s:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button through the hole on the left side of the case.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available