86e28b4db8
* Adding Files for Zodiark * zodiark.h and keymap.c layout corrections * Apply suggestions from code review Applied all suggestions from zvecr. Co-authored-by: Joel Challis <git@zvecr.com> * Applied all suggestions from fauxpark Co-authored-by: Ryan <fauxpark@gmail.com> * Defined matrix driver * Update keymap with GPL2 * Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap * Apply suggestions from code review Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme. Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Added VIA keymap * Corrected VIA Keymap oled.c Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
24 lines
1.2 KiB
Markdown
24 lines
1.2 KiB
Markdown
# Zodiark Keyboard
|
|
|
|
|
|
|
|
A split keyboard with 5x7 including a thumbcluster, encoders on each side, per key RGB, and 2x I2C headers per side, supporiting 1.3"/.96" 128x64 OLEDs (the 1.3" is an SSH1106 OLED, refer to QMK documentation for limitations), .91" 128x32 OLEDs.
|
|
|
|
* Keyboard Maintainer: [Aleblazer](https://github.com/Aleblazer/), [Discord Link](https://discord.gg/BCSbXwskVt)
|
|
* Hardware Supported: Pro Micro and derivatives
|
|
* Hardware Availability: Pending Group Buy - [Discord Link](https://discord.gg/BCSbXwskVt)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make zodiark:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make zodiark:default:flash
|
|
|
|
Remove TRRS cable from halves, plug into one side, press reset button when asked. Repeat process on the other side.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
Credit to Sofle and Josef Adamcik <josef.adamcik@gmail.com> for OLED and layer code.
|